Excelitas VTE Series Light Emitting Diodes
PART/ VTE1295H

VTE1295H - IRED, T-1 ¾ (5mm) Plastic Package with Custom Lens, 20mW, Beam angle of ±8°

The VTE1295H is a 895nm GaAlAs Infrared Emitting Diode mounted in a T 1¾ (5mm diameter) lensed plastic package with a narrow beam angle of ±8°. This IRED has a narrow emission beam profile, a characteristic making it suitable for smoke detection, IR illumination and optical switching applications.

This 895nm GaAlAs Infrared Emitting Diode can be operated in DC mode or in pulsed mode. Pulsed mode is used when a higher optical output power is required for certain applications.

Features and benefits:

  • Narrow optical emission bandwidth
  • Approved for smoke detection applications under UL file S3506
  • RoHs compliant

Applications:

  • Smoke detection
  • IR illumination
  • Optical Switching
  • Consumer coin readers
  • Lottery card readers
  • Position sensors
  • Encoders
  • Printers and copiers

Peak Emission Wavelength = 895 nm

Forward Voltage Drop = Maximum 2.0 V at 100 mA Drive Current

Reverse Leakage Current = Maximum 10 μA at 5 V Reverse Voltage

Total Output Power = Typical 20 mW at 100 mA Drive Current (Pulsed)

Irradiance = Minimum 3.0 mW/cm2, Typical 5.5 mW/cm2 at 100 mA Drive Current, Test condition: Distance = 36 mm, Aperture diameter = 6.4 mm

Peak Forward Operating Current (pulsed) = Maximum 2.5 A, 10 μs pulses at 100 Hz

Continuous Operating Current = Maximum 100 mA at 25°C

Rise/Fall Time = Typical 1μs at 20 mA Drive Current

Half Power Beam Angle = Typical ±8° at FWHM

Lead Soldering Temperature = Maximum 260°C, 1.6 mm from the case, maximum 5 seconds

Peak Emission Wavelength = 895 nm

Forward Voltage Drop = Maximum 2.0 V at 100 mA Drive Current

Reverse Leakage Current = Maximum 10 μA at 5 V Reverse Voltage

Total Output Power = Typical 20 mW at 100 mA Drive Current (Pulsed)

Irradiance = Minimum 3.0 mW/cm2, Typical 5.5 mW/cm2 at 100 mA Drive Current, Test condition: Distance = 36 mm, Aperture diameter = 6.4 mm

Peak Forward Operating Current (pulsed) = Maximum 2.5 A, 10 μs pulses at 100 Hz

Continuous Operating Current = Maximum 100 mA at 25°C

Rise/Fall Time = Typical 1μs at 20 mA Drive Current

Half Power Beam Angle = Typical ±8° at FWHM

Lead Soldering Temperature = Maximum 260°C, 1.6 mm from the case, maximum 5 seconds

Download asset:
To download this item, please complete the form below.