OmniCure V3 UV LED Heads
Designed for use with the OmniCure LX500 Controller, the OmniCure V3 UV LED Heads feature next generation high output UV LEDs to deliver best-in-class optical performance. With higher power delivery, improved efficiency, and an enhanced beam profile than its predecessor along with a range of cross compatible accessories available, the V3 Heads are optimized for use in a variety of industrial manufacturing applications. The V3 LED Heads deliver high dosage that is distributed uniformly across the spot area for faster, more consistent cures with greater control and higher efficiency.
The OmniCure V3 UV LED heads are innovatively engineered with superior thermal management by means of a copper core and optimized aluminum heat sink used to extract and dissipate internal heat generated by the LED and allowing enhanced air cooling efficiency in even the most challenging manufacturing environment.
|
GENERAL SPECIFICATIONS |
|
|
 UV LED Light Wavelength |
 365 nm | 385 nm | 395 nm | 405 nm |
|
 Typical Peak Irradiance (Max) |
 16.5 | 27.3 | 27.0 | 23.8 W/cm² respectively with 3 mm lens* |
|
 Optical Power (Max) |
 750 | 1,100 | 1,100 | 1,000 mW respectively |
|
 Typical LED Lifetime |
 20,000 hours** |
|
 LED Temperature Monitoring |
 LED temperature monitoring and over temperature protection by patented Intelli-Lamp®  technology |
|
 LED Lifetime Monitoring |
 LED number of hours of operation monitored by patented  Intelli-Lamp technology |
|
 Cable Included with the Head |
 Length: 1 meter (Extension cables also available: 1 m, 3 m and 10 m) |
|
 Head Dimensions |
 Head outside diameter: 12 mm  Long head length: 125 mm  Short head length: 55 mm |
|
 Light Source |
LED Class, Risk Group 3 |
|
 Certifications & Safety Standards |
 RoHS compliant and meets CE requirements |
|
 Warranty |
 Guarantee of 10,000 hours or 3 years, whichever comes first. |
Â
* Typical Maximum Irradiance Variation: +/- 20% (as specified by the LED device manufacturer)
** With 100% initial output at 25°C temperature and secured to standard installation clamp. This data is for reference only.
- High Irradiance: Reduces manufacturing costs with faster curing times and higher power efficiency
- 16.5 W/cm² (typical) at 365 nm
- 27.3 W/cm² (typical) at 385 nm
- 27.0 W/cm² (typical) at 395 nm
- 23.8 W/cm² (typical) at 405 nm
- Optical Power: Increased optical power with flatter peaks to deliver higher dosage uniformly over the spot area for faster and uniform cures.
- Ultra-cool UV LED heads: Long UV LED head lifetime, improved power efficiency and low cost of ownership
- Patented Intelli-Lamp® technology: Maximizes UV LED head power efficiency, long-term reliability and lifetime
- Locking HDMI Connector: Designed for easy installation
- Compatibility: Designed to ensure maximum process compatibility with your existing MAX UV LED Head setup
- Optical Output: V3 Heads Offer Higher Peak Irradiance (25%) and Higher Optical Power (75%) at same working distance (365 nm with 8 mm Lens)
- Wavelength: Comparable wavelength binning
- Mechanical: Identical Form factor as MAX LED Heads
- Radiometry: Fully compatible with LS100 Light Sensor for irradiance calibration
- Controller: Complete backwards compatibility with LX500 (V1) 2-Channel controller, Limited compatibility with LX500 (V1) 4-Channel Controller. Refer to instructions’ manual for more details.
|
GENERAL SPECIFICATIONS |
|
|
 UV LED Light Wavelength |
 365 nm | 385 nm | 395 nm | 405 nm |
|
 Typical Peak Irradiance (Max) |
 16.5 | 27.3 | 27.0 | 23.8 W/cm² respectively with 3 mm lens* |
|
 Optical Power (Max) |
 750 | 1,100 | 1,100 | 1,000 mW respectively |
|
 Typical LED Lifetime |
 20,000 hours** |
|
 LED Temperature Monitoring |
 LED temperature monitoring and over temperature protection by patented Intelli-Lamp®  technology |
|
 LED Lifetime Monitoring |
 LED number of hours of operation monitored by patented  Intelli-Lamp technology |
|
 Cable Included with the Head |
 Length: 1 meter (Extension cables also available: 1 m, 3 m and 10 m) |
|
 Head Dimensions |
 Head outside diameter: 12 mm  Long head length: 125 mm  Short head length: 55 mm |
|
 Light Source |
LED Class, Risk Group 3 |
|
 Certifications & Safety Standards |
 RoHS compliant and meets CE requirements |
|
 Warranty |
 Guarantee of 10,000 hours or 3 years, whichever comes first. |
Â
* Typical Maximum Irradiance Variation: +/- 20% (as specified by the LED device manufacturer)
** With 100% initial output at 25°C temperature and secured to standard installation clamp. This data is for reference only.
- High Irradiance: Reduces manufacturing costs with faster curing times and higher power efficiency
- 16.5 W/cm² (typical) at 365 nm
- 27.3 W/cm² (typical) at 385 nm
- 27.0 W/cm² (typical) at 395 nm
- 23.8 W/cm² (typical) at 405 nm
- Optical Power: Increased optical power with flatter peaks to deliver higher dosage uniformly over the spot area for faster and uniform cures.
- Ultra-cool UV LED heads: Long UV LED head lifetime, improved power efficiency and low cost of ownership
- Patented Intelli-Lamp® technology: Maximizes UV LED head power efficiency, long-term reliability and lifetime
- Locking HDMI Connector: Designed for easy installation
- Compatibility: Designed to ensure maximum process compatibility with your existing MAX UV LED Head setup
- Optical Output: V3 Heads Offer Higher Peak Irradiance (25%) and Higher Optical Power (75%) at same working distance (365 nm with 8 mm Lens)
- Wavelength: Comparable wavelength binning
- Mechanical: Identical Form factor as MAX LED Heads
- Radiometry: Fully compatible with LS100 Light Sensor for irradiance calibration
- Controller: Complete backwards compatibility with LX500 (V1) 2-Channel controller, Limited compatibility with LX500 (V1) 4-Channel Controller. Refer to instructions’ manual for more details.