PART/ 1102680-X
-150kV, 15kW High-Voltage DC Power Supply 1102680
Excelitas' -150 kV, 100 mA E-Beam HVPS power supply with integrated AC Filament Driver of 25 Vac, 50 Hz, <20 Arms and Grid Driver of -30 - +170 Vdc, 200 mA. Grid Driver power supplies are negative highly regulated power supplies designed for use in E-Beam systems, capable of producing 0 to -150 kVdc, 100 mA of DC power. The power supplies is designed to run continuously at full output power.
- Integrated AC Filament Power Supply is capable of producing 0 to 25 Vac, 20 Aac at 50 Hz.
- Integrated DC Grid Power Supply is capable of producing -30 Vdc to +170 Vdc, 200 mA.
- The power supplies are comprised of water cooled oil filed tank and power electronics box and no external air cooling.
- High frequency power conversion technology is used for all power supply functions. Extensive internal interlocks and diagnostics are incorporated to provide reliable and safe operation, as well as to facilitate installation and troubleshooting.
- Control of the power supplies is performed through analog interface terminal blocks located on the internal control board under protection cover.
| AC Mains is 400 Vac, 3 | Phase, 50/60 Hz 30 A (4 wire, 3-phase with earth) |
| HV Range | 0-negative 150 kV |
| Output current 0 | 100 mA |
| Maximum output power | 15 kW |
| Filament Drive Frequency | 50 Hz |
| Grid Driver sink capability | <200 mA |
| Cooling water flow rate | 0.6 - 1.1 GPM |
| AC Mains is 400 Vac, 3 | Phase, 50/60 Hz 30 A (4 wire, 3-phase with earth) |
| HV Range | 0-negative 150 kV |
| Output current 0 | 100 mA |
| Maximum output power | 15 kW |
| Filament Drive Frequency | 50 Hz |
| Grid Driver sink capability | <200 mA |
| Cooling water flow rate | 0.6 - 1.1 GPM |