PART/ VTB1112H
VTB1112H - Si PD, TO-46 lensed, 1.6mm2, IR Filter
The VTB1112H is a silicon photodiode in a hermetic TO-46 lensed package which provides an enhanced response in the blue spectral range. This photodiode exhibits a very high shunt resistance and a low dark current and has a narrow field-of-view.
The VTB1112H silicon photodiode is a blue-enhanced silicon photodiode with a 1.6 mm2 active area and a spectral response between 320nm and 1100nm.
This series of P on N silicon planar photodiodes has been designed for optimum response through the visible part of the spectrum. These photodiodes are primarily intended to be used in photovoltaic mode but may be used with a small reverse bias. They are designed to exhibit very high shunt resistance, a characteristic which leads to low offsets when used in high gain trans-impedance op-amp circuits.
Features & Benefits:
- UV to Near IR spectral range
- 1%-2% linearity over 7 to 9 decades
- Very low dark current
- Very high shunt resistance
- RoHS compliant
Applications:
- Blue light sensing
- Light meters
- Flame monitoring
- Photometry
- Active area = 1.6 mm2
- Short Circuit Current = Minimum 30 µA at 100 fc, 2850 K
- Dark Current = Maximum 100 pA at 2 V Reverse Bias
- Junction Capacitance = Typical 0.31 nF at 0 V Bias
- Spectral Range = 320 nm to 1100 nm
- Peak Spectral Response = 920 nm
- Sensitivity at peak Wavelength = Typical 0.5 A/W
- Angular Response = ±15 Degrees at 50% Response
- Active area = 1.6 mm2
- Short Circuit Current = Minimum 30 µA at 100 fc, 2850 K
- Dark Current = Maximum 100 pA at 2 V Reverse Bias
- Junction Capacitance = Typical 0.31 nF at 0 V Bias
- Spectral Range = 320 nm to 1100 nm
- Peak Spectral Response = 920 nm
- Sensitivity at peak Wavelength = Typical 0.5 A/W
- Angular Response = ±15 Degrees at 50% Response