Excelitas Blue-Enhanced Silicon Photodiodes
PART/ VTB1113BH

VTB1113BH - Si PD, TO-46 lensed, 1.6mm2, Low Id, IR Filter

The VTB1113BH is a silicon photodiode in a hermetic TO-46 lensed package with a narrow field-of-view. This photodiode offers a built-in IR rejection filter to limit the response into the visible portion of the spectrum, as well as exhibits a very high shunt resistance and a low dark current.

The VTB1113BH is a silicon photodiode with a 1.6 mm2 active area. 

This photodiode is primarily intended to be used in photovoltaic mode but may be used with a small reverse bias. It is designed to exhibit very high shunt resistance, a characteristic which leads to low offsets when used in high gain trans-impedance op-amp circuits.

Features & Benefits:

  • Visible spectral range
  • 1%-2% linearity over 7 to 9 decades
  • Very low dark current
  • Very high shunt resistance
  • RoHS compliant

Applications:

  • Ambient light sensing
  • Light meters
  • Flame monitoring
  • Photometry

Active area = 1.6 mm2

Short Circuit Current = Minimum 3 µA at 100 fc, 2850 K

Dark Current = Maximum 20 pA at 2 V Reverse Bias

Junction Capacitance = Typical 0.31 nF at 0 V Bias

Spectral Range = 330 nm to 720 nm

Peak Spectral Response = 580 nm

Sensitivity at peak Wavelength = Typical 0.29 A/W

Angular Response = ±15 Degrees at 50% Response

Active area = 1.6 mm2

Short Circuit Current = Minimum 3 µA at 100 fc, 2850 K

Dark Current = Maximum 20 pA at 2 V Reverse Bias

Junction Capacitance = Typical 0.31 nF at 0 V Bias

Spectral Range = 330 nm to 720 nm

Peak Spectral Response = 580 nm

Sensitivity at peak Wavelength = Typical 0.29 A/W

Angular Response = ±15 Degrees at 50% Response

Download asset:
To download this item, please complete the form below.
NOTE: If you have disabled our targeting cookies, you will not be able to access our videos or downloads. To update your cookie preferences, please click here to review and enable cookies.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Close