PART/ VTB8440BH
VTB8440BH - Si PD, 8mm Ceramic, 5.16mm2, IR Filter
The VTB8440BH is a blue-enhanced silicon photodiode in a 8 mm recessed ceramic package protected with a clear epoxy layer. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
The VTB8440BH blue-enhanced silicon photodiode provides a 5.16 mm2 active area and is primarily intended to be used in photovoltaic mode but may be used with a small reverse bias. These photodiodes are also designed to exhibit very high shunt resistance, a characteristic which leads to low offsets when used in high gain trans-impedance op-amp circuits.
Features & Benefits:
- Visible spectral range
- 1%-2% linearity over 7 to 9 decades
- Very low dark current
- Very high shunt resistance
- RoHS compliant
Applications:
- Ambient light sensing
- Light meters
- Flame monitoring
- Photometry
- Active area = 5.16 mm2
- Short Circuit Current = Minimum 4 µA at 100 fc, 2850 K
- Dark Current = Maximum 2 nA at 2 V Reverse Bias
- Junction Capacitance = Typical 1.0 nF at 0 V Bias
- Spectral Range = 330 nm to 720 nm
- Peak Spectral Response = 580 nm
- Sensitivity at peak Wavelength = Typical 0.29 A/W
- Angular Response = ±50 Degrees at 50% Response
- Active area = 5.16 mm2
- Short Circuit Current = Minimum 4 µA at 100 fc, 2850 K
- Dark Current = Maximum 2 nA at 2 V Reverse Bias
- Junction Capacitance = Typical 1.0 nF at 0 V Bias
- Spectral Range = 330 nm to 720 nm
- Peak Spectral Response = 580 nm
- Sensitivity at peak Wavelength = Typical 0.29 A/W
- Angular Response = ±50 Degrees at 50% Response