XTOF-100-A, 3D cwTOF Imager 8 × 8 Pixels
The XTOF-100-A chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
The XTOF-100-A is a system-on-chip (SoC) device featuring an 8 × 8 pixel ToF imager, integrated LED or laser driver, A/D converter, and on-chip controller. It provides a complete signal acquisition and processing chain on a single chip.Various modes allow the chip to operate as a high-speed single-pixel range-finder or as an 8 x 8 ToF imager.
- 8 x 8-pixel, pixel pitch 20 μm, quantum efficiency 90 % @ 850 nm
- Low power consumption of 150 mW
- Integrated illumination driver up to 200 mA
- Output data with 10 - 18-bit resolution
Operating range of up to 240 m
On-chip high power LED or Laser Diode driver
Very small footprint of 2.8 x 2.8 mm
Up to 4,000 ToF frames per-second
Excellent ambient-light suppression up to 100 kLux.
Range Finder
Volumetric Measurement
Presence Detection
Touchless Switches
- 8 x 8-pixel, pixel pitch 20 μm, quantum efficiency 90 % @ 850 nm
- Low power consumption of 150 mW
- Integrated illumination driver up to 200 mA
- Output data with 10 - 18-bit resolution
Operating range of up to 240 m
On-chip high power LED or Laser Diode driver
Very small footprint of 2.8 x 2.8 mm
Up to 4,000 ToF frames per-second
Excellent ambient-light suppression up to 100 kLux.
Range Finder
Volumetric Measurement
Presence Detection
Touchless Switches