SEARCH RESULTS (330)
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure S2000 Elite. Technical support for this product will continue to be available...
Product
The pco.flim X is a new version of the first frequency domain (FD) Fluorescence Lifetime Imaging Microscopy (FLIM) camera using a fast modulatable CMOS sensor with two readout-taps per pixel. It offers an improved cooling, which achieves -5°C with forced air cooling and -20°C image sensor temperature with water cooling. All of this reduces the readout noise level below 15 [e-] and extending the usable exposure times to 4 instead of 2s. Therefore, the pco.flim X remains the frequency domain…
Product
Enhance your imaging system with our liquid cooler pco.aquamatic III to lower sensor temperatures and minimize dark current noise for improved signal-to-noise ratio and image quality during extended exposures. Liquid cooling offers an elegant solution for applications sensitive to vibrations (originating from the fan for forced air cooling) by locally separating the pump system from the actual imaging equipment. The pco.aquamatic III ensures optimal cooling conditions for your demanding…
Product
The Excelitas pco.pixelfly™ 1.3 SWIR is a high-performance machine vision camera due to its special InGaAs image sensor which is sensitive in the shortwave infrared (SWIR), near infrared and visible range of the electromagnetic spectrum. It shows a favorably high sensitivity in the whole spectral range with up to 90 % in the shortwave infrared band. The small pixels enable the use of small magnification optics in microscopy and a low dark current for long exposure times.
Editorial
Read our article by Excelitas Senior Biomedical Applications Scientist Kavita Aswani in the September/October 2023 issue of BioPhotonics for an overview of the opportunities LEDs present to microscopy illumination in the life sciences and other arenas.
Product Category
Benefit from over 30 years of experience in the development of optical systems for laser material processing!Our broad selection of manual and motorized LINOS® Beam Expanders and comprehensive range of LINOS F-Theta-Ronar and Focus-Ronar lenses are engineered to meet the most stringent requirements. We will serve you from development and prototyping to volume production, as well as partner with you during the full lifetime of your product. From premium off-the-shelf Laser…
Application
Infrared heating is a highly efficient and effective method for processing plastics across various industrial applications. Infrared emitters play a crucial role in this heating method due to their ability to deliver focused thermal energy while maintaining a contact-free approach that enables rapid processes such as welding, deburring, and forming in just seconds.
Product Category
Excelitas PAX Light Sources are compact, integrated light source solutions containing a flash lamp, trigger circuit, and power supply in an EMI-suppressant enclosure. The PAX family of compact, precision-aligned Xenon light engine modules is the ideal choice for clinical diagnostic, in-vitro diagnostics, life sciences, drug discovery, proteomics, and analytical instrumentation applications.Excelitas takes pride in providing specialty lighting products and solutions that help to…
Application
An important bonding and assembly technique for medical device manufacturers is the use of UV curing adhesives due to their rapid processing, cure on-demand nature, ease of automation, lower energy requirements and solvent-free bonding.
Product Category
Our Fusion UV microwave-powered curing technology significantly improves production speeds, process consistency, operating lifetimes, and reduced heat onto the substrate. These UV Curing systems feature an easy-to-service modular design to provide process flexibility with a lower cost of ownership. They are available in various power classes and UV broadband wavelengths to meet your industrial curing needs. Additionally, our microwave-powered UV curing systems easily retrofit into existing…
Press Release
WHO:
Excelitas Technologies®, a global technology leader delivering innovative, customized photonic solutions, will lead a presentation titled, “Filling in the ‘Green Gap’ LED Challenge for Microscopy and Medical Illumination: Providing Mercury-Free Sustainable Illumination,” at the I2SL (International Institute for Sustainable Laboratories) Annual Conference during Session F4 on Tuesday, October 22 from 2:00 – 3:30. Excelitas presenters include Dr. Kavita Aswani, Senior Applications…
Press Release
WHO:
Excelitas Technologies®, a global technology leader delivering innovative, customized photonic solutions, will highlight its broad offering of OmniCure® LED UV Curing Systems for medical device manufacturers at MD&M Minneapolis.
WHAT:
Products on display at Excelitas booth #1432 include:
OmniCure LX500 LED Spot UV Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, the LX500…
Product Category
The Excelitas pco.flim camera system consists of the pco.flim camera and pco.flim laser, with a complete frequency synthesizer, which is required for the generation of the modulation signals in the frequency domain. The pco.flim series features a high frequency modulated CMOS image sensor that enables pixel-wise measurements of sample luminescence lifetime distributions in frequency domain suitable for fluorescence lifetime imaging. At a maximum speed of 10 Hz, full luminescence lifetime…
Press Release
WHO:
Excelitas Technologies®, a global technology leader delivering innovative, a global technology leader delivering innovative, customized photonic solutions, will highlight its innovative photonic solutions for mission-critical defense and aerospace applications at the AUSA Annual Meeting and Exposition.
WHAT:
Featured products at Excelitas booth #300 include:
Cooled and Uncooled Dismounted Soldier Sighting Solutions: Excelitas’ dismounted soldier offerings…
Product
Noblelight carbon infrared emitters (CIR®) feature a unique heating filament design that combines efficient radiation with very short response times in the seconds range. The unique twin-tube layout of our carbon emitters (the "Golden 8") gives them higher radiation density and improved mechanical stability. Carbon infrared emitters are also available as round tubes.
Product Category
Our high-performance, air-cooled UV LED curing systems provide a simple, flexible, and cost-effective solution without the need for a separate chiller. Designed for large-area curing with widths greater than 75mm, these systems are suitable for various applications, including curing adhesives, coatings, and inks. We offer a wide selection of configurations and wavelengths to meet diverse needs. Our extensive range of high-performing, air-cooled solutions comes in a compact form factor,…
Product Category
Silicon PIN photodiodes are available in a wide variety of active areas to accommodate various applications. The PIN structure allows high quantum efficiency and fast response for detection of photons in the 400 nm to 1100 nm range.Our YAG Series offers an exceptional 0.4 A/W at 1060 nm by using a thick silicon material.
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, unveils its new Mamba40 lightweight optics for night-vision goggles. The high-performance optics are an excellent choice for border surveillance, law enforcement, marine and naval surveillance, as well as tactical professionals and first responders.
Mamba40 offers high performance in a lightweight form, with 72 lp/mm resolution and distortion below…
Product Category
X-Cite® LED fluorescence illumination systems are ideal for a variety of microscopy applications. Our X-Cite LED family ranges from advanced high-end LED illuminators with intelligent triggering and pulsing capabilities to extend live-cell imaging, through to LED light sources with broad-spectrum, high-power fluorescence excitation. Several X-Cite illuminators feature our patented LaserLED Hybrid Drive® technology enabling users to switch between powerful wavelengths…
Product
The Excelitas EXACTD® platform is designed for use in Laser Warning Receiver Systems to detect and provide precise angle-of-arrival (AoA) information from direct and indirect scattered light from laser range finders, target designators, and active laser Electro-Optic (E.O.) systems.
Application
Many coatings, paints, and varnishes require heat for efficient drying. Water-based coatings need to be dried, while powder coatings need to be gelled and cured. Infrared heat emitters are particularly effective for drying water-based coatings, and they can significantly accelerate the melting process of powder coatings, thereby boosting productivity.
Product
LINOS® DLB UV 230–400 nm Dielectric-Coated Plane Mirrors are engineered for high-power and high-energy laser applications, combining durability with superior optical performance. Featuring a dielectric laser coating, these mirrors deliver high reflectivity across a broad UV range and maintain excellent performance over angles of incidence from 0° to 45°. Optimized for beam steering at a 45° angle of incidence, they provide precise 90° beam deflection while minimizing scattering…
Product
LINOS® DLB SBB 350–950 nm Dielectric-Coated Plane Mirrors are extremely broadband, highly reflective mirrors designed for versatile high-performance laser applications. Their advanced dielectric coating ensures excellent reflectivity across a wide spectral range, providing reliable performance for precision optical systems. Optimized for beam steering at a 45° angle of incidence, they deliver accurate 90° beam deflection while maintaining extremely low scattering losses. The polished back…
Application
Metal components, including propane tanks, under the-hood automotive parts, oil filter housings, and motor assemblies, are often coated or printed in demanding production environments. UV curing provides a fast, reliable method for drying and hardening inks, coatings, and finishes on these metal surfaces.
Application
Excelitas brings decades of experience to the design and manufacture of high-performance, customized solutions to demanding medical applications over a wide variety of applications.
Application Category
Many coatings, paints, and varnishes require heat for efficient drying. Water-based coatings need to be dried, while powder coatings need to be gelled and cured. Infrared heat emitters are particularly effective for drying water-based coatings, and they can significantly accelerate the melting process of powder coatings, thereby boosting productivity.
Application
Excelitas develops a variety of sensors, X-Ray sources, power supplies and illumination systems that cover the entire electromagnetic spectrum, from the very short wavelength gamma rays to long infrared wavelengths.
Application
Ultraviolet (UV) curing for wood coatings provides an effective and efficient alternative to traditional air, moisture, and thermal cured coatings. UV curing provides faster curing times, reduced energy consumption, and improved coating performance.
Application
The simplest approach to detect the fluorescence emitted from a biological sample is to image the specimen from a microscope onto a camera.
Application
Excelitas UVC technologies play a crucial role in controlling and mitigating pathogens associated with healthcare-acquired infections.