SEARCH RESULTS (1051)
Product
The C30739ECERH Short-Wavelength, Enhanced Silicon Avalanche Photodiode (Si APD) covers the spectral range from less than 400 nm to greater than 700 nm. With low noise, high gain, low capacitance and an enhanced UV-response with a quantum efficiency above 70% at 430 nm, this Si APD is designed for low-light-level applications such as molecular imaging. Its ceramic carrier package allows for easy handling and coupling to scintillation crystals such as LSO and BGO.
Product
The C30739ECERH-2 Short-Wavelength, Enhanced Silicon Avalanche Photodiode (Si APD) covers the spectral range from less than 400 nm to greater than 700 nm. With low noise, high gain, low capacitance and an enhanced UV-response with a quantum efficiency above 70% at 430 nm, this Si APD is designed for low-light level applications such as molecular imaging. Its ceramic carrier package allows for easy handling and coupling to scintillation crystals such as LSO and BGO.
Product
The C30703FH Series of Silicon Avalanche Photodiodes (Si APD) with dimensions of 10 mm x 10 mm are designed for extremely large areas and offered in a flat-pack package suitable for radiation detection. The Si APD C30703 is enhanced for blue-wavelength response and has a peak quantum efficiency at ~ 530 nm.
Product
The C30884EH Silicon Avalanche Photodiode (Si APD) offers very high modulation capability with high responsivity and fast rise and fall times. Because the fall time characteristic has no “tail”, the responsivity of the device is independent of modulation frequency up to about 400 MHz. This Si APD is made using a double-diffused “reach-through” structure and is optimized for high responsivity at wavelengths of below 1000 nm.
Product
The C30618ECERH is a high-speed InGaAs PIN Photodiode with 350 µm diameter of active area on a rectangular ceramic carrier. This photodiode provides high quantum efficiency from 800 nm to 1700 nm. It features low capacitance for extended bandwidth, as well as high resistance for high sensitivity, high linearity and uniformity within two percent across the detector active area.
Product
The C30617ECERH is a high-speed InGaAs PIN Photodiode with 100 µm diameter of active area on a rectangular ceramic carrier. This photodiode provides high quantum efficiency from 800 nm to 1700 nm. It features low capacitance for extended bandwidth, as well as high resistance for high sensitivity high linearity and uniformity within two percent across the detector active area.
Product
The VTP3310LAH is a silicon photodiode in a clear end-looking long T1 lensed package. This photodiode provides an enhanced response in the visible and near IR-spectral range, as well as exhibits a very high shunt resistance, low dark current and low capacitance.
Press Release
Excelitas Technologies subsidiary, Qioptiq Photonics GmbH & Co. KG, has been certified as a carbon-neutral company in recognition of its commitment and efforts to mitigate climate change. This distinction is awarded to companies that address their carbon impact on three levels: those who determine the levels of their greenhouse gas (GHG) emissions based upon scientific, third-party assessment; then put controls in place to reduce their carbon emissions, and finally those who also choose…
Product
The C30703FH-200 Silicon Avalanche Photodiode (Si APD) with dimensions of 10 mm x 10 mm is designed for extremely large areas and offered in a flat pack suitable for radiation detection. The C30703 Si APD is enhanced for blue wavelength response and has a peak quantum efficiency at ~ 530 nm.
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, is sponsoring the reforestation of woodlands near its newest facility in Göttingen, Germany. The project is one example of the company’s sustainability initiatives aimed at reducing its carbon footprint. Working with district forestry personnel, 40 employees of Excelitas’ Göttingen subsidiary, Qioptiq Photonics, recently planted 1,150 new trees in the…
Product
Noblelight carbon infrared emitters (CIR®) feature a unique heating filament design that combines efficient radiation with very short response times in the seconds range. The unique twin-tube layout of our carbon emitters (the "Golden 8") gives them higher radiation density and improved mechanical stability. Carbon infrared emitters are also available as round tubes.
Editorial
The increasing demand for high-power lasers (100 W up to kilowatts) in laser materials processing presents a technical challenge for optical components such as f-theta lenses, beam expanders, and Faraday isolators. As a result, thermally induced beam-degradation effects are playing an increasing role in a variety of high-power laser and related applications.
Product
The Fusion UV F300 Series offers compact microwave-powered UV curing systems with a 6-inch wide irradiator (lamp module) and power supply. It These UV curing systems are ideal for lab research, as a starter system for new processes or simpler production processes.
Press Release
Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, today announced the expansion of its Phoseon® VeriCure™ Water-Cooled UV LED Curing System with four new wide-format lengths – 750 mm, 900 mm, 1050 mm and 1200 mm – designed to meet the demanding UV curing requirements of high-speed industrial coating and printing applications…
Editorial
Infrared emitters have been successfully used for decades in industrial heating processes, such as drying paint, molding plastic, and manufacturing solar cells. The carbon infrared emitter, which has been around since the 1990s, helps to save up to 30 percent of energy in many processes.
Press Release
Turnkey Sub-Assembly is Cost-Optimized for Streamlined Integration and High Quality Imaging at Value-Added Price PointQioptiq, an Excelitas Technologies® Company and global technology leader in delivering innovative optical and photonic solutions, introduces SlimLine™, a compact, turnkey camera system for integration with mobile X-ray C-arms to deliver high-end quality at an economical entry price. SlimLine is a design-to-cost OEM product consisting of the SlimLine lens assembly optimized for…
Press Release
Excelitas Technologies, a global technology leader focused on delivering innovative, customized optoelectronics to OEMs seeking high-performance technology solutions, announced today that it has completed the acquisition of the business of privately-held Carsan Engineering, a Golden, Colorado-based engineering design company and world leader in the manufacture of arc lamp power supplies for the medical and dental markets.
With a 25-year proven track record of excellence, Carsan Engineering…
Editorial
The Quarter 2 issue of UV+EB Technology magazine features an article by Excelitas Marketing Manager Stacy Hoge examining how UV and UV LED curing technologies are shaping the future of electronics manufacturing by enabling fast, low-temperature curing of inks, adhesives and coatings.
Editorial
FlexoTech magazine featured commentary from Excelitas Marketing Manager Stacy Hoge about the latest trends in the UV curing for flexographic printing. In the article, Hoge details how UV LED curing technology for flexographic printing is advancing rapidly, offering greater efficiency, smaller footprints and cost competitiveness, while enabling faster press speeds, broader substrate compatibility and high-quality results on challenging inks and finishes. She also highlights the benefits of…
Product Category
Excelitas offers floor standing and benchtop conveyors suitable for use by formulation chemists and for low-volume or short production runs. Combine Excelitas UV curing systems with a conveyor to accelerate lab testing of UV-curable adhesives, inks and coatings, and development of new formulations.
Product Category
The Fusion UV LightHammer® Series of smart UV curing systems is our most advanced microwave-powered system, incorporating solid-state power supplies and internal sensors to monitor real-time system performance. Solid-state power supplies reduce energy costs and provide simple and flexible control schemes via software versus traditional hardware. User benefits include reduced operating costs, simple and flexible controls and reduced downtime. Learn more about these solutions.
Product Category
The Fusion UV F Series of UV curing products are production-proven and simple to use microwave-powered systems. In use for decades across the globe, these systems are often the starter system for new UV curing processes or for conversions from UV arc lamp curing processes. The F Series UV Curing systems are also ideal for less sophisticated production environments and for use in lab settings. Learn more about these solutions.
Product
The Fusion UV LightHammer® 6 MARK II is a smart microwave-powered UV curing system with a 150 mm (6 inch) irradiator and 200 W/cm (500 W/inch) power class.
Product
The Fusion UV F600 Series of microwave-powered UV curing systems has been a widely used product for over 20 years. Known for its reliability and solid-performance, on-going updates ensure it remains an effective solution for a wide variety of industrial curing applications.
Product
Our Fusion UV DRF Series of UV curing systems are used to cure photoresponsive coatings, coloring inks, and ribbon matrix polymers in the production of optical fiber and cable. These microwave-powered UV curing systems include the DRF F6 and F10T systems, which provide high power and high intensity for the curing energy required to meet the sustained high-speed demands in today's production environment.
Product Category
Fusion UV modular six- or ten-inch microwave-powered UV curing systems enable flexibility for configuring lamps on draw towers, coloring lines, coating systems, and wire or cable marking lines. A unique, patented secondary reflector in these Fusion UV curing systems collects UV energy and delivers it uniformly around the target. Combined with small-diameter, high-radiance electrodeless bulbs, the high-efficiency reflector produces the highest UV irradiance per watt of power of any UV lamp…
Product
The Fusion UV LightHammer® 10 MARK III is a smart IoT ready, microwave-powered UV curing system with a 10 inch irradiator and 240 W/cm (600 W/in) power class.
Editorial
In the February 2026 issue of Converter magazine, Excelitas Marketing Manager Stacy Hoge explores how UV curing technology enables high-speed, high-performance processing across wide web converting and siliconizing applications.
Editorial
In the March 2026 issue of Label & Narrow Web, Excelitas Marketing Manager Stacy Hoge joins industry experts to discuss the growing role of UV LED curing in label and narrow web printing—particularly for applications involving heat-sensitive substrates such as shrink sleeves and thin films.
Product
The Fusion UV DRC Series of microwave-powered UV curing systems are used to cure inks and coatings on wire, cable, and other linear products. Featuring our C6 and C10 models, this series is especially suited for high-speed inkjet marking of cable jacketing. These UV curing systems incorporate our specialty light shields, creating a highly focused zone of UV energy around the cable or wire.
Landing Page
Advanced UV curing technologies offer improved efficiency, precision, and safety, which are critical for the demanding requirements of medical device manufacturing. Additionally, advancements in adhesive formulations and dispensing technologies play a key role in optimizing and streamlining production. This 60-minute webinar will explore the latest solutions for UV curing, UV curable adhesives and coatings, and high-precision dispensing systems. It will feature experts in UV curing, adhesives…
Editorial
In the September 2025 issue of Industrial Print magazine, Excelitas Marketing Manager Stacy Hoge explores the key differences between air- and water-cooled UV LED technology in industrial printing. She explains that air-cooled systems offer easy, cost-effective integration into automated setups without the need for a separate chiller. Designed for versatility, they support high-performance pinning and full curing in digital printing applications.
Application Category
Excelitas offers innovative UV curing solutions that provide leading manufacturers worldwide with the most advanced, simple-to-use and reliable UV curing technology. Our OmniCure® product line leverages our long-standing, proven industry expertise to deliver faster and more consistent UV curing results to ensure our customers capitalize on highest product quality and production efficiency savings across various applications. UV curing systems offer a high degree of…
Editorial
PFFC magazine features an article by Excelitas Marketing Manager Stacy Hoge, which explores the technical requirements for achieving optimal UV LED curing in printing applications. The article emphasizes that successful curing depends on precisely matching UV output to the specific needs of the ink, coating or adhesive, reinforcing that no single UV LED solution fits every application.
Editorial
In the October 2025 issue of Converter magazine, Roy Kayser, Senior Manager of Global Applications & Custom Projects at Excelitas, examines whether UVC LED technology is ready for real-world UV curing applications. Drawing on recent advancements in efficiency, lifetime and manufacturability, the article explains how UVC LEDs have matured into a viable complement to established UVA LED curing systems for demanding industrial processes.
Landing Page
UV curing for digital print is evolving rapidly across industrial, packaging, and décor applications. This webinar explores how advancements in UV and UV LED curing technologies support the continued adoption of digital industrial printing—from decoration to manufacturing. Industry experts discuss technology evolution, sustainability benefits, emerging applications, and future development trends.
Advancing UV and UV LED Curing for Digital Industrial Printing
Tad Bozdech is a Mechanical…
Editorial
The February 2026 issue of Industrial Print magazine features commentary from Excelitas Marketing Manager Stacy Hoge alongside other industry experts, examining how UV and UV LED curing technologies are evolving to support the rapid expansion of digital printing across industrial, packaging and décor markets.
Editorial
Excelitas’ January 2026 article in FuturePrint explores how Illert Etiketten’s upgrade to a Phoseon Nexus ONE UV LED curing system transformed production across a wide range of applications, including shrink sleeves, self-adhesive labels, and cardboard and wraparound materials. The article highlights significant performance gains, particularly in shrink-sleeve production, where Illert now achieves print speeds of up to 200 meters per minute—levels previously unattainable.
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its OmniCure® UV LED Curing Systems at The ASSEMBLY Show.
WHAT: Featured products at Excelitas’ Booth #452 will include:
Enhanced OmniCure LX500 Controller and V3 UV LED Heads, which offer industry-leading optical output and built-in calibration support for efficient, controlled and repeatable UV curing. When used together…
Editorial
In the May/June issue of Label & Narrow Web, Excelitas Technologies Phoseon Marketing Manager Stacy Hoge weighs in on the increasing popularity of LED curing as converters seek cost savings, increased productivity, and sustainability.
Editorial
Read the March 2024 issue of ASI Magazine, which features an article from Excelitas experts that details the various ultraviolet curing technologies and innovations used for medical catheter assembly today, along with their associated benefits.
Editorial
Vision Systems Design features an article from Excelitas Optical Design Engineer Thorsten Zwinger that highlights the innovative use of “melt‑fit” optical design. By precisely adjusting mechanical and optical parameters according to real-world glass attributes, the melt‑fit approach ensures a high amount of color-correction, which results in a high-resolution image with high uniformity and minimal sample by sample variation.
Editorial
LED is gaining ground in medical illumination and spot curing. Here’s what’s possible with the light source and what device makers need to keep in mind as they transition to LED.
Product
The VeriCure™ Water-Cooled UV LED curing system is a wide-format UV source engineered to meet the demanding requirements of industrial coatings and print applications. The VeriCure UV LED system features a patented Semiconductor Light Matrix (SLM) array and a unique high-efficiency cooling design, delivering high optical power and outstanding dose performance essential for high-speed processing. Patented SLM control technology provides optimum uniformity across the irradiation area to ensure…
Editorial
Industrial Print magazine featured commentary from Excelitas Marketing Manager Stacy Hoge about the latest UV curing and printing technologies for industrial direct to object printing (DTO) applications.
Product
The FireJet™ ONE is a premium 20 W/cm² UV LED curing system designed for curing of inks, coatings and adhesives where high power in a compact design is essential. Available in widths ranging from 75 mm to 375 mm, the FireJet ONE lamps can be easily scaled by placing units next to each other and daisy-chaining them together.
Product Category
Our high-performance water-cooled UV curing systems are built to be durable and dependable, making them suitable for even the most challenging environments with extreme temperatures and debris. Additionally, these water-cooled lamps operate quietly, making them an excellent choice for situations where low noise is a priority.
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its broad offering of OmniCure® UV LED curing technologies and discuss the benefits of deep UV LED curing for applications at the European Coatings Show.Featured products at Excelitas’ exhibit, located in Hall 6, Stand 6-343, include:
OmniCure AC8-HD (High Dose) Series of UV LED Curing Systems: Offering higher optical power and enhanced performance in the same…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its OmniCure® AC Series LED UV Curing Systems at the IWCS Cable and Connectivity Industry Forum. During the IWCS Technical Symposium, Excelitas will also present a session entitled, “Advanced LED Systems for Curing Fiber Coatings.”
WHAT: Expert staff will be available at Booth # 329 to discuss the company’s OmniCure AC Series…
location
Address: Branch of Excelitas Technologies GmbH & Co. KG.
Les Conquérants – Bâtiment Everest
1 avenue de l’Atlantique
91940 Les Ulis
France
Contact: (+33) 672-65-79-73
Details: Our Excelitas branch facility in Paris, France is an administrative sales office to ensure local support and convenience for this important region. Excelitas is the leading provider of advanced, life enriching technologies that make a difference,…
Contact: (+33) 672-65-79-73
Details: Our Excelitas branch facility in Paris, France is an administrative sales office to ensure local support and convenience for this important region. Excelitas is the leading provider of advanced, life enriching technologies that make a difference,…
Editorial
Read our article in FuturePrint for an overview of the full spectrum of Excelitas UV and IR curing technologies, including a detailed look at the features and benefits of our infrared drying systems and UV curing systems, as well as ideal use cases and applications.
Editorial
Precision is essential in plastics manufacturing—especially for automotive interior components that are formed, joined, or deburred using heat. The process works best when heat is applied only where it is needed. Excelitas’ Noblelight Infrared Emitters deliver fast, targeted and energy-efficient heating, helping manufacturers reduce energy use, shorten cycle times and improve both production speed and product quality.
Landing Page
Register below to view the webinar recording.
Overview:
In the dynamic world of medical product manufacturing, ultraviolet (UV) curing technology has evolved into an indispensable tool for coatings, inks, and adhesives across a diverse range of medical products, including syringes, catheters, hearing aids and medication patches. UV curing enables the bonding, sealing, marking, and coating of a variety of substrates in compliance with stringent quality…
team_member
What is the first thing you do when you get started with work for the day?
I especially like working days that don't begin with a meeting or conference call. I can then start the day with a short office tour. I welcome my team members (occasionally spoiling them with a breakfast snack :) and briefly talk about important topics. I like to take the opportunity to listen to the small or big concerns that move my staff - successes and worries. This can be a report of a sons football match or…
Landing Page
Advancements in ultraviolet LED curing technology continue to drive the expansion of UV curing capabilities and have contributed to broadening the scope of applications. But what performance characteristics are most important? This presentation will discuss these characteristics, why they are important to UV curing applications, and also highlight recent developments in technology that are bringing new capabilities to the forefront.
Advancements in UV LED Curing
Editorial
For a holistic approach to successful design, integrate as many engineering disciplines into the design cycle and keep an eye on materials science and connectivity advances.
Editorial
Plastic laminate foils are commonly used in food packaging, sealing roofs, and even as decorative components in automotive interiors. Yet, when production speeds in plastics processing need to increase, conventional heating methods often reach their limits.
Infrared radiation solutions, such as Excelitas’ Noblelight infrared systems, provide a powerful alternative, allowing the transfer of energy without contact and with exceptional efficiency.
Editorial
UV LED curing is used throughout the print process to dry or cure anything from ink to coatings. It works very quickly compared to other curing processes like conventional UV and mercury arc lamps in addition to many other advantages.
Editorial
This article details the latest innovations in UV curing hardware, inks and varnishes, the benefits these technologies provide to printers, as well as what’s next for industrial inkjet printing.
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, announced the launch of its next generation OmniCure® S1500 Pro UV Spot Curing System. An enhanced version of the OmniCure S1500, the S1500 Pro UV Spot Curing System offers industry-leading control, reliability and high intensity irradiance with a versatile range of features tailored for automated manufacturing processes, such as high-throughput UV…
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, today launched its next-generation spot UV curing system, the OmniCure® S2000 Elite. The new S2000 Elite product builds on the heritage of its innovative OmniCure S2000 predecessor to deliver new and enhanced features for greater versatility and best-in-class UV spot curing for applications in the assembly of medical devices, electronics, optical…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its latest OmniCure® UV LED curing technology for precision assembly applications at The Assembly Show.Designed to easily integrate into both automated and stand-alone manufacturing environments, OmniCure’s innovative systems provide manufacturers with the most advanced, simple-to-use and reliable UV curing technology. Products on display at Excelitas’ exhibit (Booth #…
Editorial
Read our article in the September 2022 issue of Adhesives & Sealants Industry (ASI) Magazine to learn about the many breakthrough advantages that UV curing systems offer in Electric vehicles (EV) battery manufacturing including reduced process times, higher throughput, lower rejection rates, and environment-friendly benefits. The article also details how UV curing systems are helping to revolutionize lithium-ion battery manufacturing by reducing costs and time-to-market and improving the…
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, announced the launch of its OmniCure® LS200 UV LED Radiometry and Calibration System for the precise measurement and calibration in UV LED spot curing processes. An enhanced version of its LS100 predecessor, the LS200 brings a new level of versatility and extended measurement range to UV curing applications across industries including electronics…
Editorial
While the process steps in a UV LED manufacturing conversion are slightly more involved than a direct-swap mercury replacement, the benefits are often significant and well worth the time and effort. Learn what factors need to be considered to properly transition to LED Curing and how an informed, proactive UV LED manufacturing conversion for a conventional UV curing line can deliver significant time and cost savings for the future.
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its broad offering of curing and illumination systems for medical device manufacturers at MD&M West.Featured products on display at Excelitas’ MD&M West Booth #2321 include:
NEW APOLED™ Single-channel Chip-on Board: The new customizable single-chip LED package for surgical and dental lighting allows customers to select a specific white color temperature…
Press Release
Excelitas Technologies®, a global technology leader delivering innovative, customized photonic solutions, will showcase its OmniCure® AC Series LED UV Curing Systems at the IWCS 2019 Cable and Connectivity Symposium. Suitable for a variety of fiber curing and coating applications, OmniCure AC Series Systems utilize high-output LEDs and advanced front-end optics to achieve high-peak irradiance and exceptional uniformity for greater flexibility.Featured products at Excelitas booth #121 include…
Press Release
WHO: Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will present its UV curing solutions tailored for medical device assembly and production at MD&M West 2026.
WHAT: At the Anaheim Convention Center, Excelitas specialists will be available at Booth #2259 to showcase demonstrations and discuss the company’s…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its broad array of OmniCure® UV LED Spot and Area Curing Systems and Phoseon® UV LED Curing Systems for industrial manufacturing applications at the ASSEMBLY Show.
WHAT: Staff will be on-site at Excelitas Booth # 1617 to discuss featured products including:
OmniCure S2000 Elite: Building on the heritage of its innovative…
Editorial
In the July/August 2024 issue of Converter Magazine, Excelitas experts discuss six key trends shaping UV LED curing technology, including sustainability, flexographic/digital integration, Industry 4.0 manufacturing, low migration inks, printed substrates, and increasing press speeds.
Product Category
Excelitas provides a diverse range of UV curing systems suitable for both spot and area UV curing applications. With a comprehensive selection of UV lamp and UV LED technologies, our brands—including Noblelight, OmniCure, and Phoseon—offer maximum flexibility to meet the specific curing requirements of adhesives, coatings, and inks.
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its OmniCure®UV curing systems for medical device manufacturers at MD&M Minneapolis.
OmniCure LX500 UV LED Spot Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, the LX500 provides unmatched optical stability via Intelli-Lamp® LED technology for consistent and repeatable assembly of medical…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its latest high-performance UV curing solutions for medical applications at MD&M Minneapolis.Products on display at Excelitas’ exhibit (Booth #2235) include:
OmniCure® LX500 UV LED Spot Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, the LX500 provides unmatched optical stability for…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its full line of OmniCure® UV Curing Systems for medical device manufacturing applications at MD&M West 2024.
WHAT: The OmniCure brand enables controlled and repeatable UV assembly processes to maximize reliability and improve product yields in medical device manufacturing. Excelitas experts will be available at the…
Press Release
WHO: Excelitas®, the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will showcase advanced imaging, sensing and curing technologies at Automate 2025. Visitors to Booth #2050 will experience firsthand how Excelitas empowers next-generation automation through high-performance optics, cameras, lasers and sensing solutions.
WHAT:…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its latest OmniCure® UV LED Curing Systems for industrial printing applications at InPrint USA in Orlando, FL.Products on display at Excelitas’ exhibit (Booth 1820) include:
OmniCure AC2 Series UV LED Curing Systems: Excelitas’ OmniCure AC275 and AC2110 air-cooled UV LED curing systems combine highly efficient LEDs with advanced front-end optics to provide high…
Press Release
Tanja Bizjak-Bayer Presenting UV LED Formulations SessionExcelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its LX500, AC5 and AC9 UV LED Curing Solutions at RadTech Europe, October 17 – 19, 2017, Prague, Czech Republic.Excelitas’ solutions meet the lighting, detection, optics and other technology needs of OEMs across a wide range of industries. Products on display at RadTech Europe include:
Tanja Bizjak-Bayer,…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its wide range of OmniCure UV LED Curing Systems at the SGIA Expo.
NEW OmniCure AC8-HD (High Dose) Series of UV LED Curing Systems: Offering higher optical power and enhanced performance in the same air-cooled mechanical enclosure as its AC8 and AC9 predecessors, the AC8-HD delivers over 50% more dose with unprecedented optical uniformity. Excelitas’ patented control…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its wide range of OmniCure® UV LED Curing Systems at Labelexpo Americas.Products on display at Excelitas’ Labelexpo Americas Booth #6412 include:
NEW OmniCure AC8-HD (High Dose) Series of UV LED Curing Systems: Offering higher optical power and enhanced performance in the same air-cooled mechanical enclosure as its AC8 and AC9 predecessors, the AC8-HD delivers…
Press Release
Excelitas Technologies®, a global technology leader delivering innovative, customized photonic solutions, will highlight its latest OmniCure® UV LED Curing Systems for area and spot curing applications at The Assembly Show.Featured products at the Excelitas booth #1340 include:
OmniCure LX500 LED UV Spot Curing System: Available in either two or four LED head system configurations with up to 16W/cm2 peak irradiance, LX500 provides unmatched optical stability via Intelli-Lamp® LED…
Press Release
Booth #1738Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its latest OmniCure® solutions at the Assembly Show, October 24 – 26, 2017, Rosemont, IL (Booth #1738).Excelitas’ solutions meet the lighting, detection, optics and other technology needs of OEMs across a wide range of industries. Products on display at the Assembly Show include:
OmniCure LX500 UV LED Spot Curing System: Available in either two or four…
Press Release
Next-Generation System Offers Superior Optical Stability,
Intuitive Programming and ControlExcelitas Technologies® Corp., a global technology leader focused on delivering innovative, customized photonic solutions, introduces its new feature-rich OmniCure® LX500 UV LED Spot Curing System, ideal for medical device and electronics applications.
The OmniCure LX500 system provides the highest irradiance available with superior optical stability utilizing Excelitas’ proprietary new Intelli-Lamp…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its selection of OmniCure® UV curing solutions at the European Coatings Show. These innovative solutions are designed to address the most demanding needs of manufacturing for a variety of small-to-wide area curing applications including coatings, adhesives, sealants and inks.
WHAT: OmniCure product line experts will be available…
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, introduces its enhanced OmniCure® LX500 Controller and V3 UV LED Heads. The upgraded LX500 Controller and V3 UV LED Heads offer industry-leading optical output and built-in calibration support for efficient, controlled and repeatable UV curing. When used together, the OmniCure LX500 UV LED Spot Curing System delivers outstanding optical stability and…
Press Release
WHO:
Excelitas Technologies®, a global technology leader delivering innovative, customized photonic solutions, will showcase its innovative OmniCure® LED UV Curing Systems for medical device manufacturers at BIOMEDevice 2019.
WHAT:
Featured products at Excelitas booth #1043 include:
OmniCure S2000 Spot UV Curing Lamp System: The OmniCure S2000 Spot UV Curing System is ideal for precision adhesive curing in a variety of industries, particularly medical device bonding applications.…
Landing Page
Meet us at the Car Symposium 2024, one of the industry's leading congresses in Europe for over 20 years. This year's conference will be dedicated to the transformation and sustainability within the industry. Top executive keynote speakers will give valuable insights in workshops and lectures throughout the event. Join us in our booth to speak to our product experts about our UV LED and infrared solutions.
Join us for a Presentation:
Topic: How photonic solutions improve battery…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its latest medical illumination and curing systems at BIOMEDevice in Boston, MA.Products on display at Excelitas’ Booth 841 include:
Cermax® MX300 All-Metal Xenon Light Source: The MX300 Metal-Body Xenon Light Source is the latest innovation from the medical Xenon leader. The new product features 20% more light output than alternative Xenon sources, better…
Product Category
Excelitas high-performance, air-cooled UV LED curing systems deliver high peak irradiance and dosage for rapid curing in a variety of applications. These systems are designed with high-power LEDs available in multiple wavelengths to suit specific needs. Their efficient air-cooling mechanism ensures long lifespans and reduced power consumption. UV LED curing systems are available in various sizes and are scalable to meet custom and flexible curing area requirements. This design allows for easy…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its expanded portfolio of UV curing systems for medical device manufacturing applications at MD&M West 2025. The extended Excelitas portfolio now includes UV lamps and systems, UV LED spot and area curing systems, UV microwave, Infrared emitters and systems, and medium pressure UV lamps.
WHAT: Field-proven UV…
Press Release
WHO: Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, will display its wide range of OmniCure® UV LED spot and area curing systems for industrial manufacturing at The ASSEMBLY Show.
WHAT: Excelitas experts will be at booth #645 to discuss featured UV LED curing systems,…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its OmniCure® product line of UV lamp and LED curing solutions for coatings, adhesives and inks at RadTech UV+EB 2022. As part of the New Product Debut 2 Track, Excelitas Senior Global Applications Manager Roy Kayser will also present a session detailing the OmniCure S2000 Elite – Next Generation Lamp-based UV Spot Curing System…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its latest illumination and curing systems for high-precision medical applications at MD&M West in Anaheim, CA.Products on display at Excelitas’ exhibit (Booth #2233) include:
OmniCure® LX500 UV LED Spot Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, OmniCure LX500 provides the highest…
Press Release
High Peak Performance Enables Faster Line Speeds and Reduced Costs Excelitas Technologies®Corp., a global technology leader focused on delivering innovative, customized photonic solutions, introduces its new OmniCure® AC5 Series UV LED systems for small area curing. Designed with a unique combination of high output LEDs and custom optics, the OmniCure AC550/P and OmniCure AC575/P air-cooled UV LED curing systems provide high irradiance (14W/cm2), enabling manufacturers to achieve outstanding…
Press Release
Excelitas Technologies Corp. and Enercon will present a webinar highlighting best practices when using curable coatings, inks and adhesives. Featured speakers include Mike Kay, director of product management at Excelitas Technologies and Ryan Schuelke, vice president, sales, at Enercon Industries Corporation.The webinar will cover the following topics:
Emerging applications for cured inks, coatings and adhesives
How plasma treatment promotes adhesion
Selection criteria for plasma…
Press Release
WHO: Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its broad offering of OmniCure® UV Curing Systems for medical device manufacturers at MD&M West.
WHAT: Expert staff will be available in-person at Excelitas booth #2233 to discuss OmniCure’s industry-proven spot and area UV curing technology, including:
OmniCure S2000 Spot UV Curing System: The OmniCure S2000 Spot UV Curing System is ideal for…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its wide variety of UV curing and illumination products for medical applications at MD&M West.Featured products on display at Excelitas’ MD&M West Booth #3228 include:
OmniCure® LX500 UV LED Spot Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, LX500 provides unmatched optical stability…
Press Release
WHO: Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will showcase its newest OmniCure® and Fusion UV® curing systems for medical device assembly at MD&M Midwest 2025.
WHAT: Excelitas experts will present demonstrations of the following innovations in Booth #3009:
OmniCure S2000 Elite UV Curing System…
Press Release
WHO: Excelitas®, the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will highlight its expanded portfolio of UV curing and infrared drying solutions for coating, adhesive and printing applications at the 2025 RadTech UV&EB Technology & Conference. Company experts will also present several sessions about the latest technology…
Press Release
WHO: Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, will highlight its Phoseon® brand of UV LED curing solutions at Labelexpo Americas. These innovative solutions are designed to address the most demanding needs for printers and converters with label and packaging applications…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will display its new illumination and curing systems for medical applications at BIOMEDevice San Jose.Featured products at Excelitas Exhibit (Booth #1306) include:
NEW APOLED™ Single-channel Chip-on Board: The new customizable single-chip LED package for surgical and dental lighting allows customers to select a specific white color temperature while achieving high color…
Press Release
WHO: Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will showcase its latest UV curing and intelligent infrared (IR) solutions for metal coating applications at PaintExpo 2026.
WHAT: At Booth #1243, Hall 1, company experts will demonstrate how Excelitas’ IR drying and UV LED curing solutions help manufacturers…
Press Release
WHO: Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, will display its latest OmniCure® UV Curing Systems for medical device manufacturing applications at MD&M Minneapolis.
WHAT: Excelitas booth #3316 will feature the following UV spot and UV LED area curing…
Press Release
WHO: Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will display its wide range of UV and UV LED spot and area curing systems for industrial manufacturing at The ASSEMBLY Show.
WHAT: Excelitas experts will be at booth #645 to discuss featured UV curing systems, which help manufacturers achieve controlled and…
Press Release
WHO: Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will showcase the company’s full spectrum of UV curing and IR drying solutions for labels and packaging at the Labelexpo Europe 2025.
WHAT: Excelitas´ expanded portfolio now offers customers the full spectrum of solutions from UV to IR to better support label and…
Press Release
OmniCure® AC8225-F with Custom Optical Design Offers High Irradiance for Rapid Curing, Reduces Power Consumption Up to 60% Compared to Traditional Arc Lamp SystemsExcelitas Technologies Corp.customized photonic solutions, today introduced its new OmniCure® AC8225-F UV LED Fiber Curing System with a custom optical design for curing fiber optic coatings. The new, air-cooled OmniCure AC8225-F provides outstanding optical performance, exceptional cost savings, easy integration and superior…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will showcase its OmniCure® UV LED Curing product line at MD&M Minneapolis. Enabling controlled and repeatable UV assembly processes, OmniCure UV LED Curing Systems maximize reliability and improve product yields for a variety of medical device manufacturing applications.
WHAT: Staff will be available at Excelitas Booth # 3216…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will showcase its broad offering of OmniCure® LED UV Curing Systems for medical device manufacturers at MD&M Minneapolis.
WHAT: Expert OmniCure staff will be available in-person at the Excelitas exhibit to discuss its featured products, including:
OmniCure S2000 Elite Spot UV Curing System: Building on the heritage of its innovative…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase several new OmniCure® UV LED Curing Systems at UV.EB West in San Francisco, CA.Products on display at Excelitas’ exhibit include:
OmniCure LX500 UV LED Spot Curing System: Featuring up to four UV LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, OmniCure LX500 provides high irradiance with unmatched optical stability for consistent…
Press Release
WHO: Excelitas®, the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will highlight its expanded portfolio of UV curing and infrared drying solutions for wood coating applications at LIGNA 2025. Excelitas offers customers the full spectrum of solutions from UV to IR, supporting a wide range of applications.
WHAT: Excelitas experts…
Press Release
High Dose UV LED Curing System Enables Customers to Easily Scale Production Speeds for Demanding ApplicationsExcelitas Technologies® Corp., a global technology leader focused on delivering innovative, customized photonic solutions, expands its popular OmniCure® UV LED Curing product line with the introduction of the OmniCure® AC8-HD (High Dose) Series of UV LED Curing Systems. Offering higher optical power and enhanced performance in the same air-cooled mechanical enclosure as its AC8 and AC9…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its wide range of OmniCure® UV LED Curing Systems at InPrint Milan.Products on display at Excelitas’ InPrint Milan Stand 138 include:
NEW OmniCure AC8-HD (High Dose) Series of UV LED Curing Systems: Offering higher optical power and enhanced performance in the same air-cooled mechanical enclosure as its AC8 and AC9 predecessors, the AC8-HD delivers over 50% more…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its wide array of OmniCure® LED UV Curing Systems for the most demanding medical device applications, including medical device assembly, endoscopy and surgical visualization, at MD&M West.
WHAT: OmniCure LED UV Curing Systems enable medical device manufacturers to achieve a controlled and repeatable UV assembly process for…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its latest OmniCure® LED UV curing systems at the Eastern Coatings Show.Featured products at Excelitas’ exhibit, located at booth #204, include:
OmniCure AC8-HD (High Dose) Series of LED UV Curing Systems: Offering higher optical power and enhanced performance in the same air-cooled mechanical enclosure as its AC8 and AC9 predecessors, the AC8-HD delivers over…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its OmniCure® LED UV curing systems at OptiNet China 2019. Featured products at Excelitas’ exhibit, located at booth #A18, include:
OmniCure AC9225-F LED Fiber UV Curing System: Ideal for fiber coating or marking applications, the new air-cooled OmniCure AC9225-F delivers up to 20W/cm2 irradiance at a 10-15mm working distance. The system features a custom…
Press Release
First Ever 3-in-1 Smart Thermal IR Detector for Motion Detection, Presence Sensing and Temperature Measurement Recognized for Innovative Excellence in Electronics IndustryExcelitas Technologies® Corp., a global technology leader focused on delivering innovative, customized photonic solutions, announced that its CaliPile™ Multi-Function Infrared (IR) Sensor has been honored with the Gold award in the 2017 ECN (Electronic Component News) IMPACT Awards for the Sensors category. CaliPile…
Press Release
Excelitas Technologies, a global technology leader focused on delivering innovative, customized optoelectronics to OEMs seeking high-performance technology solutions, is presenting at the 5th Annual RadTech Expo held in conjunction with the RadTech Asia 2013 Conference in Shanghai.
Mr. Cheung will share Excelitas’ expertise in “UV LED curing trends at 365 nm.” Attendees will receive a clear understanding of existing UV LED capabilities and opportunities for industrial applications in the…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will display its wide range of OmniCure® UV LED Curing Systems for demanding medical device applications, including medical device assembly, at MD&M Minneapolis.
WHAT: Expert staff will be available at Excelitas booth #3332 to discuss the company’s OmniCure UV LED Curing Systems, which enable medical device manufacturers to achieve a…
Press Release
Excelitas®, the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, announces the availability of enhanced Phoseon™ UV LED Curing Systems with newly integrated Modbus TCP communication protocol.
This significant upgrade to Phoseon products’ robust control architecture allows faster, more intelligent communication with FireJet™ ONE,…
Press Release
WHO: Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, will highlight its Phoseon® UV LED curing solutions at the PRINTING United Expo. These innovative solutions are designed to address the most demanding needs for printers and converters.
WHAT: Excelitas experts will…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will display its high-performance, specialty lighting products for UV curing and disinfection from its NobleLight®, OmniCure® and Phoseon® brands at the 2024 RadTech UV+EB Technology and Conference. Excelitas will also present at both the RadTech and IUVA Conference addressing advancements in UV LED curing and disinfection technology.…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its broad offering of OmniCure® UV LED Curing Systems for medical device manufacturers at MD&M Minneapolis.Products on display at Excelitas’ MD&M Minneapolis Booth #1736 include:
OmniCure LX500 UV LED Spot Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, LX500 provides unmatched optical…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its OmniCure®UV LED curing solutions at the InPrint Industrial Inkjet Conference. Excelitas’ Senior Product Manager Pamela Lee will also present a session entitled, “UV LEDs: Where Are They Now?”, during the conference’s Breakout Session Technical Track on Tuesday, May 1 at 1:30 p.m. The presentation will discuss UV LED technological advancements and supporting…
Press Release
Excelitas Technologies to Showcase UV Curing Innovations at the 2024 IWCS Cable & Connectivity Forum
WHO: Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, will display its high-performance, specialty lighting products for UV curing from its Noblelight®, OmniCure® and Phoseon® brands at the 2024 IWCS Cable & Connectivity Industry Forum.
WHAT: Excelitas experts will be…
Press Release
New Addition to OmniCure Product Line Enables More Efficient Curing
and Faster Line SpeedsExcelitas Technologies® Corp., a global technology leader focused on delivering innovative, customized photonic solutions, today introduced the latest addition to its popular OmniCure® product line – the OmniCure AC9225-F UV LED Curing System. Ideal for fiber coating or marking applications, the new air-cooled OmniCure AC9225-F delivers up to 20W/cm 2 irradiance at a 10-15mm working distance. The system…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will showcase its broad array of OmniCure® UV LED curing systems for coatings, adhesives and inks at the BIG IDEAS for UV+EB Technology Conference.
WHAT: OmniCure product line experts will be available at the Excelitas booth to discuss featured products, including:
OmniCure AC Series LED Small Area UV Curing Systems: The OmniCure AC…
Press Release
Excelitas Technologies Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its latest OmniCure UV LED Curing Systems for area and spot curing applications at The Assembly Show.Products on display at Excelitas’ Assembly Show Booth #1340 include:
NEW OmniCure AC9225-F UV LED Fiber Curing System: Ideal for fiber coating or marking applications, the new air-cooled OmniCure AC9225-F delivers up to 20W/cm2 irradiance at a 10-15mm working…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, will highlight its full line of OmniCure® UV LED Curing Systems for medical device manufacturing applications at MD&M West 2023.
WHAT: OmniCure UV LED Curing Systems enable controlled and repeatable UV assembly processes to maximize reliability and improve product yields in medical device manufacturing. Excelitas experts will be available…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its latest OmniCure® UV LED curing innovations at the UV+EB Technology BIG IDEAS Conference. Excelitas’ Director of Product Management, UV Curing, Mike Kay will also present a session entitled, “Opportunities for New Applications with the Advancements in Technology of Short Wavelength UV LEDs,” during the event’s UV LED track on Tuesday, March 19 at 3:30 p.m.Featured…
Press Release
Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, announces its latest CaliPile® innovation – the high-precision, medical-grade TPiS 1T1386 L5.5H Thermopile Sensor. Featuring high temperature accuracy, combined with configurable “threshold” functions and low power consumption during operation, TPiS 1T1386 L5.5H offers an ideal solution for remote skin-temperature measurement applications and…
Press Release
Excelitas Qioptiq, a global technology leader focused on delivering innovative optical and photonic solutions, will highlight its wide array of image intensified, thermal and fused weapon sights and surveillance systems for defence and security applications at Milipol Paris 2017.Solutions on display in Stand 6L 106 include:
KITE In-Line Weapon Sight: KITE In-Line is a compact night sighting system that is mounted on a weapon in front of a magnified day sight. It uses image…
Press Release
WHO:
Excelitas Technologies®, a global technology leader delivering innovative, customized photonic solutions, will highlight its broad offering of OmniCure® LED UV Curing Systems for medical device manufacturers at MD&M Minneapolis.
WHAT:
Products on display at Excelitas booth #1432 include:
OmniCure LX500 LED Spot UV Curing System: Featuring up to four LED heads with up to 16W/cm2 peak irradiance and proprietary feedback technology, the LX500…
Press Release
Range of customized, high-performance, energy-efficient lighting assemblies on displayInter airport Europe 2011 - Booth Number 1666, Hall B5 - Excelitas Technologies, a global provider of innovative, customized optoelectronics to OEMs seeking high-performance technology solutions, announced today that it will exhibit a variety of LED and Xenon-based airfield lighting designs and assemblies at the interAirport Europe 2011 conference, October 11-14, at the Munich Trade Fair in Munich, Germany…
Press Release
Excelitas Technologies to Highlight OmniCure® UV LED Curing Systems at InPrint Industrial Print Show
Excelitas Technologies,sup>® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase new OmniCure® UV LED Curing Systems for industrial printing applications at InPrint in Milan, Italy.Recent additions to Excelitas’ growing line of versatile OmniCure UV LED Curing Systems (Stand E58) include:
OmniCure ACX Series UV LED Curing Systems: Designed for the highest irradiance and fastest curing speeds, Excelitas’ new water-cooled OmniCure ACX…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its latest OmniCure® UV LED curing solutions at the RadTech UV+EB 2018 Technology Expo and Conference. Excelitas’ Director of Product Management, UV Curing Mike Kay will also present a session entitled, “Improved Curing Solutions with LED Wavelengths below 365nm”, during the conference’s UV LED I track on Tuesday, May 8 at 1:15 p.m.
NEW OmniCure AC8-HD (High Dose)…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will display its line of OmniCure® UV LED curing systems for inks, adhesives and coatings at IJC 2016 – The Inkjet Conference in Düsseldorf, Germany.Products on display in Excelitas’ exhibit (Booth D1) include:
OmniCure AC5 Series UV LED Curing Systems: Designed with high-output LEDs and custom optics, OmniCure AC550/P and OmniCure AC575/P air-cooled UV LED curing systems…
Press Release
Mike Kay Presenting “Improving Surface Cure with UVC LEDs”Excelitas Technologies® Corp., a global technology leader focused on delivering innovative, customized photonic solutions, will highlight its new UV LED curing products at RadTech UV+EB 2016 (Booth # 713).Excelitas’ solutions meet the lighting, detection, optics and other technology needs of OEMs across a wide range of industries. Products on display at RadTech UV+EB include:
OmniCure® LX500 UV LED Spot Curing System: Available…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will highlight its latest OmniCure AC Series of UV LED Curing Platforms including the new OmniCure AC9225-F UV LED Fiber Curing System at the IWCS 2018 Cable and Connectivity Symposium.Products on display at Excelitas’ IWCS Booth #129 include:
NEW OmniCure AC9225-F UV LED Fiber Curing System: Ideal for fiber coating or marking applications, the new air-cooled OmniCure AC9225-F…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will display its new illumination and curing systems for medical applications at BIOMEDevice in Boston, MA.
XLMii™ LED Fiber Optic Light Source: Offering medical device OEMs simplified integration of LED illumination for endoscopy, surgical microscopy and surgical headlamps, the LED fiber optic light source features configurable components that can be quickly adapted to customer…
Press Release
WHO: Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, will present and showcase its expanded portfolio of UV curing systems for fiber and wire coatings, cable marking and ribboning from its OmniCure® , Phoseon® and Fusion UV® brands at IWCS 2025.
WHAT: Excelitas will present demonstrations of the following…
Press Release
Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, today introduced the Generation 8 Phoseon® Fiber Curing System designed primarily for fiber and wire coating applications, including optical fiber, electrical and structural wire, and threads for smart fabrics.…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will display the latest additions to its growing line of versatile OmniCure UV LED curing systems at Labelexpo Americas in Rosemont, IL.Products on display in Excelitas’ exhibit (Booth #1611) include:
OmniCure ACX Series UV LED Curing Systems: Designed for the highest irradiance and fastest curing speeds, Excelitas’ new water-cooled OmniCure ACX UV LED systems provide up to…
Press Release
WHO: Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its innovative OmniCure® LED UV Curing Systems for medical device manufacturers at MD&M West 2020.
WHAT: Featured products at Excelitas booth #2233 include:
OmniCure S2000 Spot UV Curing Lamp System: The OmniCure S2000 Spot UV Curing System is ideal for precision adhesive curing in a variety of industries, particularly medical device bonding…
Press Release
Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase the latest additions to its OmniCure® UV LED Curing Systems at the IWCS International Cable & Connectivity Symposium in Orlando, FL.Featured curing systems at Excelitas booth 408 include:
OmniCure AC8225-F+ UV LED Curing System: Excelitas’ compact, air-cooled UV LED curing system features a custom optical design that delivers outstanding performance,…
Press Release
Excelitas Technologies to Present and Highlight OmniCure LED UV Curing Systems at RadTech UV+EB 2020
WHO: Excelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, will showcase its OmniCure® LED UV Curing Systems at RadTech UV+EB 2020. Excelitas’ Business Development Manager Marvin Ruffin will also present a session entitled, “Preventing Hospital-Acquired Infections with UVC LEDs,” during the 2020 IUVA Americas Conference UV for Healthcare Applications Track.
WHAT: Featured products at Excelitas booth #513 include:
OmniCure…
Press Release
With market-leading LED innovation and field-proven reliability, Phoseon adds further energy-efficient alternatives in UV lighting solutions across industrial curing, scientific illumination and non-contact UVC disinfection to Excelitas’ extensive illumination technologies portfolio.
WALTHAM, Mass., February 15, 2023 – Excelitas TechnologiesÒ Corp., a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions, completed the acquisition of…
Press Release
WHO: Excelitas Technologies® Corp., a leading industrial technology manufacturer focused on delivering innovative, market driven photonic solutions, will highlight its OmniCure® AC Series UV LED Curing Systems and Phoseon™ Fiber Curing Systems at the IWCS Cable and Connectivity Industry Forum. During the Supplier Spotlight, Excelitas will also present a session entitled, “Advanced LED Systems for the Curing of Fiber Coatings.”
WHAT: Expert Excelitas staff will be available at Booth…
Press Release
Excelitas®, a leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor and avionics sectors, today announced the launch of the Phoseon® Nexus II™ UV LED Curing Platform for flexographic printing. Nexus II brings increased system reliability, improved performance in high-temperature environments and optional high-airflow model for enhanced cooling compared to the…
Press Release
Excelitas Technologies® Corp., the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life sciences, advanced industrial, next-generation semiconductor, aerospace and defense end markets, announces the launch of the VeriCure™ Water-Cooled UV LED curing system —a wide-format UV source engineered to meet the demanding requirements of wood coating applications.
The VeriCure UV LED system features a patented…
Press Release
Timely Speech on “Practical Implementation of Industry 4.0” to address automation and data exchange in manufacturing technologiesExcelitas Technologies® Corp., a global technology leader delivering innovative, customized photonic solutions, announces that the company’s Executive Vice President and COO, Joel Falcone, is presenting a keynote address to industry innovators on the practical implementation of Industry 4.0.
Mr. Falcone will speak at the California Network for Manufacturing…