SEARCH RESULTS (2072)
Product
Excelitas offers LED and Halogen illumination modules, accessories, and adapters within the Optem® FUSION product line for simplified illumination integration and control. Depending on the application requirements, both on-axis coaxial illumination and off-axis ring light support are available.
Product
Excelitas offers a vast selection of Optem® FUSION Lower Function Modules that are the basis for adding key functionality to your imaging system. These modules are designed to allow the integration of different lighting techniques, add manual or motorized focus movement, and expand on additional capabilities to your imaging solution.
Product
Our Optem® FUSION Camera Tubes are available in a wide range of magnifications, allowing for fine-tuning of the system and optimizing the performance to your image sensor. Available in both standard and mini formats, it ensures the performance is maximized optically and geometrically for nearly any application.
Product
The Optem Fetura+™ Advanced Zoom Lens is the culmination of over 30 years of research, design, and engineering, resulting in the performance apex of optical zoom lens technology. It features self-contained electronics, direct-drive linear rail technology, and unparalleled high-performance image quality guaranteed for over one million cycles. Fetura+ is built to maximize performance for the most demanding high-throughput applications. Its improved direct drive motion system eliminates…
Product
Excelitas offers a wide selection of camera mounts within the Optem® FUSION product portfolio to support almost any standard camera format. Our camera mounts allow for easy connection of your imaging sensor to the FUSION system.
Product
MachVis™ System Configurator is a powerful web-based configurator for imaging applications. Covering a broad selection of the Excelitas product portfolio, including LINOS® and Optem® lenses, PCO® cameras, and X-Cite® fluorescence illuminators, MachVis enables users to quickly design and configure complete optical setups. With an intuitive interface and smart component suggestions, it simplifies the selection process and…
Product
Rodenstock® Photographic Lenses and Filters are a proud part of the Excelitas optical technology portfolio. These innovative premium lenses are setting new standards for state-of-the-art performance in digital photography.
Product
Excelitas high performance infrared (IR) prisms provide dielectric antireflection and high reflection coatings to deliver superior laser damage resistance and exceptional environmental stability and mechanical durability. Utilizing our world-renowned capability for optical fabrication and polishing an extensive range of materials and geometries, our prisms are characterized by high quality surfaces, minimal edge defects, large clear apertures, tight angular tolerances and low wavefront error…
Product
Excelitas high precision prism assemblies allow multiple beams to be combined, split, or redirected based on differences in wavelength and/or polarization making them ideal in the construction of compact beam multiplexing systems for applications in aerospace, defense, bioinstrumentation, analytical instruments and semiconductor metrology systems.
Product
Excelitas offers risley (wedge) prisms with high accuracy laser beam steering in a wide variety of demanding military, industrial and instrumentation applications. Using our patented Ion Beam Sputtered (IBS) Coatings, our risley prism pairs feature low scatter, low loss surfaces, maximum optical throughput and highest laser damage resistance.
Product Category
Excelitas offers a broad range of high-performance LINOS® Imaging Lenses specifically designed to address most any conceivable application in automated optical inspection and machine vision. If one of our many off-the-shelf products doesn't meet your needs, engage our experts to develop a custom solution for you.
Product
Excelitas offers a range of laser prisms that include porro, penta, rhomb, corner cubes and right angle prisms. Using our patented Ion Beam Sputtered Coatings (IBS), our laser prisms ensure the highest spectral performance and environmental durability.
Product
Excelitas multispectral lenses have high reflectivity or transmission at multiple wavelength bands (808 nm, 1064 nm, 1570 nm, 3 µm - 5 µm) with excellent wavefront quality. These features enable common aperture FLIR applications while maintaining a high laser damage threshold.
Product
Excelitas high-precision infrared CO2 laser lenses are customized from a variety of substrate materials, including Ge, ZnSe, ZnS, and Cleartran. Using our substrate fabrication and coating leading-edge process technologies, our CO2 laser lenses minimize subsurface damage for excellent Laser Damage Thresholds.
Product Category
Excelitas offers a wide range of precision prisms using a variety of substrate materials including sapphire, optical glasses, fused silica, Si, Ge, ZnSe, ZnS, CaF2, MgF2, Cleartran and AMTIR. Our sophisticated controlled fabrication and coating technology is used to consistently deliver superior performance while the use of our full suite of advanced metrology instruments enables us to achieve and verify arc second level angle accuracy.
Product
Excelitas offers 3 µm to 14 µm thermal infrared imaging lenses, which can be customized from a variety of substrate materials, including CaF2, ZnS, ZnSe, Ge, Si, and GaAs lenses from 6 mm to 250 mm diameters with a typical surface flatness of λ/10 (at 633 nm). In addition, our advanced plasma source (APS) coating technology for highly densified thin films provides superior environmental durability.
Product
Excelitas high-performance visible and infrared aspheric lenses offer a unique combination of high surface accuracy to achieve small, focused spot sizes and low surface roughness for minimal scatter and loss. These aspheric lenses feature sophisticated, multi-layer thin film coatings that deliver multispectral performance and a high laser damage threshold. Our aspheric lenses are produced with a densified structure to yield exceptional environmental stability making them ideal for demanding…
Product
Excelitas precision spherical lenses can be customized in lens size and radius curvature to serve your specific application best. Our infrared spherical lenses are specially designed to meet the needs of demanding military applications throughout the infrared. Using our advanced plasma source (APS) coating technology, these spherical lenses offer superior resistance to environmentally-induced damage degradation and enable precise control over part distortion on high aspect ratio parts.
Product Category
Excelitas offers high precision UV, VIS, NIR and infrared lenses from a variety of substrate materials, including sapphire, fused silica, Si, Ge, ZnSe, ZnS, CaF2, MgF2 and Cleartran. Every aspect of the lens production process, from surface generation to the final coating application is conducted using carefully controlled, advanced methods to avoid subsurface damage and deliver lenses with pristine optical surfaces.
Product
Excelitas offers multi-band filters that deliver a unique combination of high reflectivity and transmission at selected multiple spectral regions. Our multi-spectral optics provide optimum transmittance, sharp edges, exceptional blocking with excellent wavefront quality, and high laser damage resistance making them ideal for demanding applications that require high optical performance and outstanding environmental stability.
Product
Excelitas offers a diverse range of dichroic coatings that precisely control laser system light. Various technologies, from evaporative to ion beam sputtered coatings are available to match the specific component's application. Our infrared dichroic filters provide the optimum transmittance and sharp spectral transition edges with exceptional wavelength stability for ambient temperature and humidity changes.
Product
Using our Ion Beam Sputtering (IBS) technology, Excelitas’ edge filters provide bandpass and sharp edge filters that have exceptional wavelength stability for ambient temperature and humidity changes. This highly controlled deposition process ensures that these edge filters are manufactured to meet the most demanding spectral requirements. Furthermore, our infrared edge filters provide the optimum transmittance, high blocking, and offer sharp spectral edges.
Product
Excelitas offers bandpass filters with exceptional wavelength stability in ambient temperature and humidity, using our Ion Beam Sputtering (IBS) technology. This highly controlled deposition process allows us to manufacture filters that meet your most demanding spectral requirements. Our infrared bandpass filters provide the optimum transmittance, highest blocking, and sharp spectral edges.
Product
Excelitas offers custom thin film polarizers for the applications across UV and the infrared. Utilizing our extensive fabrication and thin film coating technology and expertise, our polarizers provide exceptional extinction ratio, ultra-low loss, superior wavefront performance and high laser damage resistance. Careful control of all aspects of component fabrication, from polishing through coating, ensures optimal system level performance.
Product
Excelitas high precision beamsplitter assemblies provide low transmitted wavefront distortion, minimal beam deviation, and precise control of output beam phase relationships. These beamsplitter assemblies allow multiple beams to be combined, split, or redirected based on wavelength and/or polarization. Using our adhesive free Activated Covalent Bonding (ACB) process, our beamsplitter assemblies provide very high laser damage resistance with exceptional thermal and environmental stability…
Product Category
Excelitas’ diverse range of wavelength selective coatings are characterized by optimum transmittance and sharp spectral edge transitions. They include bandpass filters, long-wave and short-wave pass filters, notch filters, dichroics, trichroics, harmonic separators as well as spatially variable components. Utilizing our ion beam sputtering technology, our custom filters have exceptional wavelength stability with respect to changes in ambient temperature and humidity.
Product
Multi-spectral imaging windows provide high transmission, excellent wavefront quality, low scatter, and exceptional environmental durability. These windows can be customized from virtually any substrate material, including fused silica, Si, Ge, ZnSe, ZnS, CaF2, MgF2, Cleartran and AMTIR.
Product
Excelitas non-polarizing cube beamsplitters deliver broadband, polarization insensitive operation and exceptional path length matching for reflected and transmitted beams. Our unique adhesive-free Activated Covalent Bonding (ACB) process, together with a series of high precision, proprietary fabrication techniques, enable consistency across cubes with subarcminute beam deviation accuracy and low wavefront distortion.
Product
Excelitas offers precision fabrication and coating techniques that enable us to create high performance cube beamsplitters that provide a unique combination of superior optical performance and high laser damage resistance. With the use of our proprietary adhesive-free Activated Covalent Bonding (ACB) technology assembly process, Excelitas cube beam splitters provide outstanding environmental stability and durability. They are available in the UV, VIS, NIR as well as narrow or broad…
Product Category
Excelitas offers a wide array of beamsplitters in plate, cube and custom multi-port configurations. Utilizing our proprietary adhesive-free Activated Covalent Bonding (ACB) technology, we produce highly robust assemblies which provide superior wavefront performance and high laser damage resistance. With consistent performance over a broad wavelength range, our beamsplitters offer a unique solution for your most demanding applications in defense, aerospace, semiconductor manufacturing,…
Product
Excelitas offers high durability custom windows with exceptional mechanical, chemical and environmental durability to address the most demanding applications starting at 193nm wavelength. Utilizing our proprietary Advanced Plasma Source (APS) and Ion Beam Sputtering (IBS) coating technologies, these highly durable windows are damage resistant and available in the UV, VIS, NIR and infrared.
Product
The Excelitas corrosion resistant windows provide low defect, extreme environmental stability, and mechanical and chemical (abrasion, salt fog) durability using our proprietary Ion Beam Sputtered (IBS) coating technology.
Product
Excelitas high precision laser windows provide low transmitted wavefront distortion, high parallelism, low scatter, high laser damage resistance and exceptional environmental durability. Available in UV, VIS, NIR and the infrared, our laser windows are ideal for applications starting at 193 nm and that require tight control of transmitted wavefront.
Product
Excelitas offers a range of copper high reflectors designed for use with high-power CO2 lasers to enable beam delivery and beam shaping. These laser mirrors offer a combination of high reflectivity >99.7% at 10.6 μm, excellent surface quality (40-20) and low scatter with surface roughness <50Å. Produced from oxygen-free, high thermal conductivity (OFHC) copper, these reflectors deliver superior optical performance and maximum laser damage threshold.
Product
Excelitas offers a range of high-performance Measurement Instruments to enable the execution of demanding light analysis applications.
Product
Excelitas offers aspheric and parabolic mirrors which provide extremely accurate surface form and low sag deviation accuracies as low as ½ fringe making these ideal for a variety of demanding infrared imaging and military target designation applications.
Product Category
Excelitas offers high precision windows for a variety of demanding applications such as laser cavities, aerospace, military, illumination, and instrumentation. With the use of our advanced fabrication and coating techniques, our custom windows provide tightly controlled transmitted wavefront, a high degree parallelism, minimal scatter, high laser damage resistance and outstanding durability for the most challenging environments.
Product
Excelitas offers high-energy laser mirrors that provide an unmatched combination of high laser damage threshold, ultra-low scatter, excellent wavefront performance, and rugged mechanical durability. With the use of proprietary superpolishing fabrication and precision Ion Beam Sputtered (IBS) technology, our high-energy laser mirrors are highly reflective and environmentally stable to meet the needs of demanding applications such as military targeting and range finding, industrial materials…
Product
Excelitas graded reflectivity laser mirrors provide high damage threshold, spectral stability and precise spatial shaping of the intensity and phase characteristics of laser beams. With the use of proprietary precision Ion Beam Sputtered (IBS) technology, our graded reflectivity laser mirrors offer environmental stability and mechanical durability to meet the needs of demanding and harsh applications such as cavity optics in unstable resonator lasers.
Product
Excelitas low loss mirrors provide the lowest possible scattering and absorption loss making them ideal for the most demanding laser-based applications. By utilizing our proprietary state-of-the-art Ion Beam Sputtered (IBS) coating and superpolishing technology, our mirrors are manufactured to ensure the lowest possible scattering losses and deliver ultra-smooth surfaces.
Product Category
Excelitas offers an extensive range of custom mirrors, with particular expertise in ultra-high reflectivity and laser damage resistance. Our state-of-the-art superpolishing technology is used to custom fabricate flat, spherical substrates, while a diverse portfolio of coating technologies produce the highest possible spectral performance at any wavelength.
Product Category
Building on a century-long heritage of optical manufacturing and leveraging our global footprint of state-of-the-art production facilities, Excelitas delivers custom optical component and assembly solutions for the most demanding applications. With highly specialized abilities for lenses, mirrors, prisms and prism assemblies, Excelitas possesses the industry’s most comprehensive optical manufacturing processes from the deep UV to the long wave IR..
Product Category
LINOS® Mounted Plano-Convex Lenses are designed to focus and collimate light with high precision across a wide range of optical systems. Their mounted design allows easy handling and seamless integration into optical assemblies, making them suitable for laboratory, industrial, and OEM applications.
Product Category
Excelitas provides a comprehensive range of lamp and LED illumination solutions known for their exceptional control, stability and superior uniformity in fluorescence microscopy applications. Our lamp Illuminators feature pre-aligned, long-life lamps for convenient and easy installation. In addition, our LED systems offer high-intensity illumination with intuitive controls and eliminate the need for bulb replacements, simplifying both setup and operation. Several of our X-Cite…
Product Category
X-Cite® has grown to be the industry standard in fluorescence illumination which first originated with Lumen Dynamics and then acquired by Excelitas in 2013. Known for its exceptional stability and superior illumination uniformity, X-Cite offers a wide range of Lamp and LED light sources for fluorescence microscopy applications. X-Cite Lamp Illuminators provide the convenience of pre-aligned, long-life lamps and easy installation while our X-Cite…
Product Category
Whether observing fixed or live cells, X-Cite® offers a complete range of lamp illuminators that optimize imaging and ensure greater data reliability. These X-Cite products are known for maximum stability and superior illumination uniformity for fluorescence microscopy applications that provide the convenience of pre-aligned, long-life lamps and easy installation. When purchasing a new X-Cite illuminator, receive an additional two months product warranty upon registering your…
Product Category
Excelitas offers a wide range of high-power, high-stability lamp solutions suitable for applications such as consumer products, industrial, medical and sciences. Leveraging our innovative technologies and field-proven expertise, customers can engage Excelitas for fluorescence illuminators, pulsed-arc and short-arc Xenon-based technologies, UV curing lamps, as well as high-performance arc lamp power supplies to best meet your specific requirements.
Product Category
OmniCure® has built a reputation as one of the most trusted brands in UV curing that spans a long history dating back to 1984 and acquired by Excelitas in 2013. For decades, leading manufacturers have been using OmniCure for its innovative, simple-to-use and reliable UV curing technology in adhesives, coatings and inks. With a broad array of spot and area UV curing systems designed with LED and Lamp UV technology, customers can choose from a wide…
Product Category
Our high-performance air-cooled UV LED systems for small-area curing offer lengths of up to 240 mm. These UV LED curing systems are equipped with high-power LEDs and custom optics to provide high peak irradiance, ensuring fast and even curing. Designed for simple, flexible, and cost-effective integration, our UV LED curing systems are compact and lightweight. These modular small-area UV LED systems are suitable for both low- and high-power applications. Featuring advanced optics, these…
Product Category
Excelitas offers a full range of innovative LED solutions to meet the most demanding performance requirements for applications such as medical, industrial, sciences and consumer products. Leveraging our innovative technologies and field-proven expertise, customers can engage Excelitas for discrete LED components, modules and subassemblies, or complete LED light source systems.
Product
The BlueLight® Small Area UVC Flash Disinfection System provides a fast, reliable, and eco-friendly solution for disinfection without the use of harmful chemicals or mercury-based light sources. This system achieves a reduction of more than 4 logs in microbial load, operating efficiently at high throughputs of up to 500 square meters per hour. Originally designed for disinfecting food packaging, such as beverage bottle caps, this BlueLight system is also effective on other surfaces…
Product Category
Our Noblelight BlueLight® UVC flash disinfection systems deliver outstanding performance and power, achieving significant log reduction rates over a variety of packaging types. Utilizing pulsed xenon flash technology, these UV systems are designed for seamless integration into packaging manufacturing lines. With decades of experience in flash lamp manufacturing, our design teams leverage their expertise to develop effective, reliable and high-intensity UVC flash systems for surface…
Product Category
LINOS® is a well-established brand of premium off-the-shelf optical lens elements, optomechanical bench systems, magneto-/electro-optic modules, lens assemblies and sophisticated optomechanical sub-assemblies.With a deep-rooted photonics foundation dating back to 1898, LINOS originated in 1996 as a result of the merger of Spindler & Hoyer, Steeg & Reuter Präzisionoptik, Franke Optik and Gsanger Optoelektronik.Conceived, engineered and manufactured in Germany, LINOS Optical…
Product
The XTOF-100-A chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product Category
The XTOF series ToF chips is a system-on-chip (SoC) device and contains a ToF imager, integrated LED or laser driver, A/D converter, and on-chip controller — providing a complete signal acquisition and processing chain on a single chip for optical distance measurements and object detection.
Product Category
Pioneering in Cameras and Optoelectronics (PCO) has been our shared philosophy since our establishment in 1987. Starting with image-intensified cameras, followed by the co-invention of the groundbreaking sCMOS sensor technology, PCO greatly surpassed the imaging performance standards of the day. Acquired by Excelitas in 2021, our PCO camera portfolio continues to forge ahead as leaders in digital imaging innovation across diverse applications such as scientific and industrial research,…
Product
Excelitas LA Series of Line Sensors are the most versatile photo detectors in sensing technology. These linear image sensors set a new benchmark in miniaturization and performance. Featuring an ultra-compact design, they are the smallest in their class worldwide, delivering outstanding sensitivity, speed, and precision for the most demanding optical measurement systems. This compact architecture combines a very small form factor of 8.1 x 1.3 x 0.23 mm, very high QE from 350 nm to 1100 nm, and…
Product Category
For decades, Cermax® Xenon has been the pioneering industry leader for high-performance medical and industrial light sources. From single replacement lamps, to complete custom and off-the-shelf Illuminators, Cermax is the most trusted brand name for Xenon lighting…virtually synonymous with medical illumination applications and high-intensity, perfect bright white light.Since the introduction of our short-arc Xenon lamps in the early 1980s, Cermax Xenon technology has been an…
Product Category
Excelitas manufactures a range of advanced UVC Disinfection Systems specifically designed for effective surface treatment, packaging disinfection, and air treatment. These cutting-edge systems harness a variety of technologies to deliver powerful and effective UV radiation. Our innovative solutions are utilized across a diverse range of industries, including food and beverage packaging, exhaust air treatment, surface decontamination, and upper-room disinfection. We address the complex…
Product Category
Excelitas offers a wide variety of standard catalog photodiode arrays. With standard pitch values from 0.8 mm to 2.5 mm, you are sure to find the right detector for your X-ray imaging needs. In addition to a wide range of standard catalog items, we also offer customization to meet the unique challenges of your specific application.
Product Category
Excelitas offers precision optics in most every form and spanning the entire spectrum. You can choose from more than 4,800 off-the-shelf optical products! Our selection includes plano-convex lenses, biconvex lenses, aspheres and achromats with individual coatings, as well as plano optics, mirrors, polarization optics, electro-optics and optical design software and of course our optical assemblies and systems, such as objective lenses, optronics modules, and complex custom sub-assemblies and…
Product Category
Excelitas designs and manufactures advanced ultraviolet (UV) solutions for the disinfection of air, liquids, and solid surfaces. Our comprehensive portfolio of UVC light sources includes a wide range of lamp and component technologies—such as UVC LEDs, Xenon and Krypton flashlamps, excimer lamps, low- and medium-pressure UV lamps, as well as amalgam and out-of-arc lamps. These technologies are engineered to meet diverse system requirements and application needs, effectively addressing the…
Product Category
Excelitas offers a wide range of low-pressure UVC lamps designed to oxidize and disinfect air, liquids, and solid surfaces. These high-quality, long-lasting lamps are reliable and provide consistent output across various temperatures. Additionally, we offer customization options, giving our customers maximum flexibility to meet their specific process requirements.
Product
The Fusion UV F600 Series of microwave-powered UV curing systems has been a widely used product for over 20 years. Known for its reliability and solid-performance, on-going updates ensure it remains an effective solution for a wide variety of industrial curing applications.
Product Category
The Fusion UV F Series of UV curing products are production-proven and simple to use microwave-powered systems. In use for decades across the globe, these systems are often the starter system for new UV curing processes or for conversions from UV arc lamp curing processes. The F Series UV Curing systems are also ideal for less sophisticated production environments and for use in lab settings. Learn more about these solutions.
Product
The Fusion UV F300 Series offers compact microwave-powered UV curing systems with a 6-inch wide irradiator (lamp module) and power supply. It These UV curing systems are ideal for lab research, as a starter system for new processes or simpler production processes.
Product Category
Excelitas offers floor standing and benchtop conveyors suitable for use by formulation chemists and for low-volume or short production runs. Combine Excelitas UV curing systems with a conveyor to accelerate lab testing of UV-curable adhesives, inks and coatings, and development of new formulations.
Product
The Fusion UV DRS 10/12 floor standing conveyors and LC6B or LC6U benchtop conveyors are standard products designed for use with our Noblelight microwave-powered UV curing systems. Chemists and manufacturing production managers use these conveyors to test UV-curable adhesives, inks, and coatings when developing new formulations, evaluate cure response, and assess performance during low-volume or short production runs.
Product Category
Fusion UV was founded in 1971 with the invention of microwave-powered UV curing technology. In 2024, Excelitas acquired the Fusion UV microwave product portfolio through the acquisition of Noblelight. UV microwave lamps and systems are used in hundreds of industrial ultraviolet curing applications, including automotive headlamps, flooring, medical devices, wire marking, and electronic components.These microwave-powered UV curing systems are available in a variety of power classes…
Product
The Fusion UV LightHammer® 6 MARK II is a smart microwave-powered UV curing system with a 150 mm (6 inch) irradiator and 200 W/cm (500 W/inch) power class.
Product
Excelitas Linear Excimer Lamps produce eye safe narrow band 222nm UV-C wavelengths, achieving excellent lifetimes and output with materials optimized for working in the UV-C. Electrode life is maximized by isolation from the plasma discharge. While standard linear sizes are available, we also offer customized co-axial excimer lamp geometries upon request.
Product
Excelitas Excimer Modules encapsulate excimer lamps with an integrated reflector, transverse discharge, and external electrodes that maximize lamp lifetime, all contained in a rugged but aesthetically pleasing modular design. Customized sizes are available, with smaller modules allowing for prototyping, tiling, or small work areas. Larger sizes allow disinfection of larger areas with a minimal number of power supplies.
Product Category
Excelitas excimer lamps, manufactured as linear and module forms, generate eye safe narrow bandwidth 222nm ultraviolet light safely and efficiently. The 222nm wavelength is proven effective at combating a wide variety of microbes with long lifetimes, perfect for stand-alone systems or to be integrated into multiple modality disinfection solutions.
Product
The FireJet™ ONE is a premium 20 W/cm² UV LED curing system designed for curing of inks, coatings and adhesives where high power in a compact design is essential. Available in widths ranging from 75 mm to 375 mm, the FireJet ONE lamps can be easily scaled by placing units next to each other and daisy-chaining them together.
Product
The VTH2120 silicon photodiode with a 100 mm2 active area is offered in chip form for optimal alpha particle detection, such as radon gas detection applications. This photodiode provides an enhanced response to radiation of interest, with a radiation robust chip design and a large active area of 10x10mm.
Product Category
Excelitas utilizes Silicon and InGaAs materials for our photodiodes to provide detection from 220 nm to 1700 nm. These devices are offered in a variety of sizes to meet customer sensitivity and speed requirements. Many different types of photodiodes are available to serve various unique applications.Our photodiode arrays are used to generate an X-ray image by scanning an object line by line. The X-rays are converted into light through the attached scintillator crystal. The light…
Product Category
The Excelitas VTH21 and VTH30 photodiodes are offered in chip form for optimal alpha particle detection such as radon gas detection applications. Featuring a robust chip design, these low capacitance silicon photodiodes provide high responsivity to radiation of interest. These photodiodes are available in both a 5x5mm and 10x10 mm large active area for maximum detection of low level radiation and a spectral response between 400 nm and 1100 nm.
Product
The VTH2110 is a 25 mm2 silicon photodiode offered in chip form for optimal alpha particle detection, such as radon gas detection applications. This photodiode provides an enhanced response to radiation of interest, with a radiation robust chip design and a large active area of 5x5 mm. This low capacitance silicon photodiode provides a 25 mm2 active area and spectral response between 400 nm and 1100 nm.
Product Category
Excelitas offers an array of specialty illumination technologies with custom design capabilities aligned with customer requirements to deliver an illumination solution optimized to your specifications. From simply supplying a discrete LED, Laser, Lamp, or UVC source to an Infrared Heating Emitter or System to a complete, integrated system, Excelitas consistently delivers lighting solutions for the most demanding applications.
Product Category
The Optem® FUSION Modular Microscopy platform is the next generation of microimaging lens systems for high precision, high magnification applications across Visible to SWIR wavelengths. An extensive range of ready-to-use modules make it the most comprehensive lens system on the market. Whether for high-throughput automated inspection or high-resolution defect detection, the system is designed to meet the evolving needs of today’s OEM micro-imaging applications. The Optem…
Product
X-Cite XYLIS™ II is a true arc lamp replacement for routine and advanced fluorescence imaging applications. This system offers several improvements including sound levels 10dB quieter than the original XYLIS and increased optical output with the broadest spectrum available in a white light LED for fluorescence microscopy. It surpasses traditional arc lamps for brightness – making it ideal for both compound and stereomicroscopes. Incorporating our patented and award-winning LaserLED…
Product
Excelitas infrared (IR) LED modules provide precise, uniform, fast, and controllable heating in the near infrared wavelength range for industrial applications requiring high control precision. These high-efficiency IR LED products feature modular designs that enable flexible customization to meet specific application requirements. Compared to technologies such as lasers or VCSELs, these modules are easier to integrate into industrial systems.
Product
The XTOF-102-B chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product
The XTOF-102-A chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product
The XTOF-101-A chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product
The XTOF-RM-100 is a miniaturized 3D ToF camera. It uses a proprietary time-of-flight technology that incorporates the XTOF-100-A ToF chip and a small LED to illuminate the scene.
Product
The XTOF-M-100 is a miniaturized 3D ToF camera. It uses a proprietary time-of-flight technology that incorporates the XTOF-100-A ToF chip and a small LED to illuminate the scene.
Product
The XTOF-M-101 is a miniaturized 3D ToF camera. It uses a proprietary time-of-flight technology that incorporates the XTOF-100-A ToF chip and a small LED to illuminate the scene.
Product Category
The XTOF modules is a miniaturized 3D ToF camera. It is based on a proprietary time-of-flight technology. They incorporate the XTOF ToF chip and an integrated small LED for scene illumination. enabling accurate depth sensing and object detection in a compact form factor.
Product
Excelitas operates global application competence centers to test and optimize applications using infrared (IR), ultraviolet (UV), arc, and flash lamp light sources. Our experienced team applies technical expertise and specialized light sources to develop efficient solutions for complex requirements. We closely collaborate with customers and safeguard confidential information to support the validation and implementation of customized solutions at customer sites and production facilities...
Product
Excelitas operates an independent Noblelight measurement laboratory accredited by Deutsche Akkreditierungsstelle (D-PL-17776-01-00) in accordance with DIN EN ISO/IEC 17025:2018. Customers benefit from a team of physicists, engineers, and technicians with specialized expertise in light-source measurement and testing, ensuring optimal product performance and compliance. The laboratory offers customer-specific measurements both at the customer facilities and on-site.
Product
LINOS® Rotary Support is designed for precise angular adjustment of optical components, making it ideal for applications in laser technology and photonics. Its smooth and accurate movement ensures reliable positioning of polarizers and birefringent filters, helping achieve optimal beam control and system performance. With a compact design and easy handling, this support simplifies alignment tasks while maintaining high stability. Perfect for research laboratories and advanced optical setups,…
Product
PCO cameras are powerful, well-characterized instruments designed to capture reliable and precise image data in the most challenging settings. Our online tools help users compare models and identify the most suitable PCO camera for specific applications. These tools showcase imaging capabilities and present key performance differences, enabling informed, confident camera and lens selection.
Product
Excelitas Pulsed Xenon UV light sources offer a broadband UV spectrum useful in a variety of disinfection applications. Our Xenon Flashlamps can be custom designed and manufactured in any geometry with precision and economies of scale. Input energies range from <1 Joule to >10,000 J, with powers from a few Watts to multiple Kilowatts. These Pulsed Xenon’s broad UV emission wavelengths are tailored for output in the UV-C, eliminating any concern about the peak absorption of the…
Product
UVC LED-based Chip-On-Board (COB) sources offer the greatest flexibility with the highest level of integration of all the UVC light sources. Excelitas offers the capability to package bare LED die into component-level packages of any number in any shape or size. Since, these packages are die carriers, any number of LED die or sensors can be integrated into any given design. Die count per package can range from one die to a thousand. The limitations are endless, and are not…
Product
OmniCure® S2000 Elite is a new generation of lamp-based UV spot curing systems designed and developed for the most demanding manufacturing applications. Offering highest reliability and quality for light curing adhesive processes, the OmniCure S2000 Elite redefines UV spot curing with enhanced productivity, precision, and security, while enabling next level control and usability.
Product Category
The OmniCure® S Series offers UV Spot Curing Systems and accessories used for precision adhesive curing of medical devices, electronics and optoelectronics. Due to the accuracy requirements and critical nature of these devices, a repeatable process with reliable UV curing equipment is essential for achieving highest product quality, rapid production and low manufacturing costs.
Product
The next-generation pco.hsr 8x25 CLHS high-speed image recorder is designed for continuous, lossless capture of the fastest transient events. Its robust FPGA-based architecture streams data directly to high-endurance SSDs, combining extreme data throughput with uninterrupted recording. Supporting up to eight cameras simultaneously, the pco.hsr 8x25 CLHS uniquely combines ultra-high-speed acquisition with extended image recording, ensuring no critical moment is missed in high-speed…
Product Category
Noblelight infrared emitters leverage extensive experience and know-how working with thousands of applications. They are designed with the highest-quality materials and technology to ensure optimal performance, even in the most challenging industrial processes. Infrared emitters are used in numerous industrial heat processes such as drying and curing of coatings, forming, embossing, laminating, joining, welding, browning, heating, preheating and germ reduction. Learn more about these…
Product Category
Our Noblelight Infrared thermal processing solutions harness the power of infrared thermal technology to generate heat within a product through electromagnetic wave transmission. This process enables contactless heating with rapid energy transfer at high power. Furthermore, our infrared systems are customized to customer specifications and offer short response times to help boost process speed, improve quality, and drive energy efficiency.
Product
The FireEdge™ FE410 UV LED curing system is designed with advanced features that provide up to 50% higher irradiance, power, and dose than the original FireEdge FE400. These features are particularly beneficial for customers seeking faster processing speeds to enhance throughput while still enjoying the compact design of the FE400. Designed for full cure and pinning applications, the FireEdge FE410 includes built-in intensity control options suitable for inkjet pinning, 3D printing, and…
Product
The FireEdge™ FE400 air-cooled UV LED curing system offers advanced features with maximum flexibility. It includes built-in intensity control options, enabling it to be used for both full-cure and pinning applications by delivering high UV power. This system provides process stability thanks to the patented TargetCure™ technology, which ensures precise and predictable UV output. Its unique scaling feature allows multiple units to be stacked end-to-end, resulting in contiguous and uniform UV…
Product
The FireEdge™ FE100 air-cooled UV LED curing system utilizes passive cooling through natural convection, enabling precise finish control for applications such as digital inkjet pinning and applications where space is limited. The extremely slim form factor features an emitting window of 8mm in diameter making it ideal for flat panel display edge curing. Ambient cooling eliminates the need for any external forced-air cooling system or chiller to remove heat from the UV source.
Product
OmniCure® AC5 Series of air-cooled UV LED systems are designed for small area curing. With advanced front-end optics, these high power UV curing systems deliver 14 W/cm2 peak irradiance for fast, even curing. The Series includes the AC550, AC550P, AC575 and AC575P, with the P versions having enhanced optics to optimize the dose for short working distances along with a removable window for easy cleaning to support print applications.
Product
OmniCure® AC4 Series of air-cooled UV LED curing systems are designed with high output LEDs and custom optics to deliver high irradiance of over 8 W/cm2 with exceptional uniformity at long working distances. Consisting of the OmniCure AC450, AC450P, AC475, AC475P, our AC4 Series utilizes our patented process for individually addressing each LED UV module output to provide consistent results by ensuring high longitudinal uniformity over the entire 50 mm (2″) to 75 mm (3…
Product
OmniCure® AC2 Series offers compact, air-cooled UV LED curing systems for small-area applications. With advanced front-end optics, the AC275 and AC2110 systems deliver over 2.5 W/cm2 peak irradiance with exceptional uniformity.
Product
The Phoseon FireJet™ FJ801 UV LED Large Area Curing System features a touch controller that simplifies operation with its intuitive touchscreen interface. With no knobs, buttons, or moving parts on the front, the controller is easy to store and transport. This system is designed for adhesive and coating curing applications requiring low irradiance and long dwell time on large scale production lines. The FJ801 light source maintains excellent uniformity and reliability. Additionally, the user-…
Product
The Phoseon FireJet™ FJ800 UV LED Curing System is a large area curing solution for adhesive and coating curing applications requiring low irradiance and long dwell time on large scale production lines. Starting with a 100 mm x 100 mm longitudinal surface, the modular components can be scaled in all directions, providing uniform UV illumination to adjacent areas.
Product
The Phoseon™ FireJet FJ100 Gen2 features a compact design and offers end-to-end scalability, making it a perfect solution for a variety of printing and coating applications. This fully self-contained unit comes with five different window lengths to facilitate easy integration. The lamps can be controlled using PLC signals, allowing for instant on/off functionality, intensity control, and other primary functions, or digital control for more advanced status and control.
Product
OmniCure® AC Series UVC LED Curing Systems leverage our industry-proven AC Series platforms to provide the exceptional performance, quality, and robustness that is synonymous with the OmniCure brand. Delivering high output power and outstanding uniformity within a compact modular air-cooled design, these UVC systems are scalable and easy to integrate to meet the specific needs of a variety of applications.
Product
OmniCure® AC9 Series are high-power UV LED Curing Systems delivering over 14 W/cm2 peak irradiance for fast curing of inks, adhesives and coatings. Consisting of the AC9150, AC9150P, AC9225, AC9225P, AC9300 and AC9300P, the AC9 Series are high-performing, air-cooled solutions with a small form-factor to enable fast line speeds in industrial manufacturing and printing.
Product
OmniCure® AC8150P-HD, AC8225P-HD and AC8300P-HD air-cooled, UV LED Curing Systems deliver an outstandingly high optical dose, bringing UV LED curing to the next level. The AC8-HD Series of products are designed with a patented technology that enables unbeatable uniformity of output across the irradiation area. Available in 385 nm, 395 nm, and 405 nm wavelengths, the AC8-HD delivers over 15 W/cm2 peak irradiance and double the dose of the standard AC8 Series of products,…
Product
OmniCure® AC8 Series of air-cooled UV LED curing systems are designed to deliver over 8 W/cm2 peak irradiance with exceptional uniformity for even curing. The AC8150/P, AC8225/P and AC8300/P UV curing systems provide high longitudinal uniformity over the entire 150 mm (6") to 300 mm (12") curing area for consistent and repeatable results of all parts. The "P” versions of the AC8 Series have enhanced optics to optimize the dose for short working distances required by…
Product
OmniCure® AC7 Series of air-cooled UV LED curing systems are suitable for large-area curing. Designed with high-output LEDs and custom optics, the AC7150 and AC7300 systems deliver over 5 W/cm2 peak irradiance and exceptional uniformity over the entire curing area. The AC7 Series provides high longitudinal uniformity to ensure consistent and repeatable curing of all parts over the entire 150 mm (6") to 300 mm (12") curing area.
Product Category
Our Fusion UV microwave-powered curing technology significantly improves production speeds, process consistency, operating lifetimes, and reduced heat onto the substrate. These UV Curing systems feature an easy-to-service modular design to provide process flexibility with a lower cost of ownership. They are available in various power classes and UV broadband wavelengths to meet your industrial curing needs. Additionally, our microwave-powered UV curing systems easily retrofit into existing…
Product
Our Fusion UV power supply towers or cabinets are ideal for multisystem microwave-powered UV curing system installations. The power supply tower or closed cabinet is used to house power supplies, enabling a single point for electrical power connections and control.
Product Category
All Fusion UV accessories and replacement parts are produced to the highest quality standards for our microwave UV curing systems. Choose from a wide selection of UV spare parts, including bulbs, reflectors, panes, and magnetrons, to ensure reliable performance and minimize unexpected, costly downtime. Additionally, explore our microwave UV accessories designed to optimize system operation and improve UV curing results. These accessories include power supply racks, specialty reflectors, belt…
Product
Dichroic reflectors are ideal for UV curing processes on heat-sensitive substrates as they minimize heat reflection onto the substrate. These reflectors can easily retrofit into existing Fusion UV microwave-powered irradiators or be used in new UV curing systems. Learn more about this solution.
Product
The Advanced Intelligent Monitoring System (AIMS®) allows manufacturers to monitor the performance of their smart UV curing systems in real-time and embrace Industry 4.0. Designed for use with our LightHammer® Mark II and Mark III Smart UV curing systems, AIMS helps minimize downtime and reduce the total cost of ownership.
Product
The OmniCure® CV300 is a versatile conveyor system designed to complement the OmniCure AC Series of high power UV LED curing systems and is suitable for production, laboratory and research and development applications. The CV300 can handle substrates up to 310 mm (12.2”) wide on its open mesh Teflon® coated fiberglass belt with an effective curing area of up to 300 mm (12”) depending on the OmniCure LED system being utilized.
Product Category
Excelitas offers a variety of UV curing accessories to meet the needs of various curing applications. Choose from a wide range of optical adaptors that convert a smaller area of high-output power into a larger area, optimizing optical power while ensuring evenly distributed irradiance and uniformity. Our regulatory-certified power supply controllers integrate seamlessly into standard industrial equipment racking, delivering multiple power outputs in a robust, high-density, and scalable…
Product
OmniCure® SC Series power supply controllers are tailored specifically for the OmniCure AC Series UV LED curing systems. Designed with application flexibility in mind, the SC Series offers a selection of system controllers to best meet the needs of a particular curing application.
Product
OmniCure® offers a selection of adapters customized for use with the OmniCure AC Series of high power UV LED curing systems to address a wider range of applications. Attaching to the front face of the OmniCure UV LED systems, the AC Optical Adapters convert a smaller area of high output power into a larger area while optimizing optical power and delivering evenly distributed irradiance and uniformity.
Product
OmniCure® PLC2000 programmable controller is designed to complement the OmniCure AC Series UV LED curing systems. When connected to an AC Series UV LED head, this multipurpose, external controller device allows you to intelligently manage, monitor and control an LED system. With unparalleled control of the UV LED systems, the PLC2000 can be used to dynamically adjust the output intensity, exposure time, and on/off capabilities while providing system information and error monitoring…
Product
Amba® UV curing mercury arc lamps are designed for reliable curing results and come in various lengths and power classes. They are ideal for use as replacement lamps in applications such as printing, wood coating, and many other UV curing processes. OEM designers turn to us for comprehensive technical consulting and in-house testing capabilities.
Product Category
Noblelight was established in 1992 and has a rich history of patented lamp technology dating back to 1904. Acquired by Excelitas in 2024, Noblelight is a recognized leading technology brand worldwide with a comprehensive array of infrared emitters, flash lamps, UV and UVC lamps, UV curing systems and accessories, and specialty lighting solutions. These products span the wavelength spectrum from ultraviolet to infrared, making them ideal for a variety of applications, including industrial…
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure S1500 Pro. Technical support for this product will continue to be available.
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure S2000 Elite. Technical support for this product will continue to be available...
Product Category
Excelitas provides various supporting documents and software for our UV Curing systems, including those for discontinued products. Please select the relevant product below to download the appropriate documentation and software. If you require technical support on an OmniCure system, please contact us via our OmniCure Support Form.
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure AC9225-F Fiber UV LED Curing System. Technical support for this product will continue to be available.
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure V3 UV LED Heads. Technical support for this product will continue to be available.
Product
The OmniCure® LX500 UV LED Spot Curing system controller is uniquely designed with proprietary Intelli-Lamp® technology that monitors LED head temperature and lifetime data, while automatically maintaining optical stability ± 5% to provide greater process assurance for your application. Available in either 2 or 4-channel configurations, the OmniCure LX500 is the most flexible and cost-effective option for industrial manufacturing.
Product Category
The OmniCure® LX Series of UV LED Spot Curing solutions include our compact LX500 system controller and UV LED MAX Heads for a complete UV curing system with outstanding optical stability and process control. Combine these with our UV LED Radiometer and a selection of focusing lenses, extension cables and mounting clamps for greater flexibility.
Product
Designed for use with the OmniCure LX500 Controller, the OmniCure V3 UV LED Heads feature next generation high output UV LEDs to deliver best-in-class optical performance. With higher power delivery, improved efficiency, and an enhanced beam profile than its predecessor along with a range of cross compatible accessories available, the V3 Heads are optimized for use in a variety of industrial manufacturing applications. The V3 LED Heads deliver high dosage that is distributed uniformly across…
Product
The OmniCure LS200 UV LED radiometry and calibration system ensures precise measurement and calibration of UV LED power or irradiance directly at the cure site, enabling manufacturers to control light output for a reliable and repeatable curing process. The LS200 features seamless integration with the LX500 UV LED Spot Curing System for calibration, and offers optional accessories, wide measurement range (1mW to 2000mW or 50mW/cm2 – 40 W/cm2), exceptional precision, and…
Product Category
Excelitas UV LED and UV lamp spot curing systems are ideal for precision spot curing applications including medical device assembly, electronics, optoelectronics and a wide range of other applications. Our newest OmniCure® S2000 Elite spot curing system features Closed-Loop Feedback and Intelli-lamp® technologies that automatically monitor and maintain system optical output for the highest process quality. Assure UV output accuracy with OmniCure radiometry accessories to…
Product
The OmniCure® S2E Network Module is designed to save time on maintenance and keep production running smoothly with remote process monitoring and UV curing equipment control. The S2E complements the OmniCure family of S-Series spot UV curing systems, offering the same high level of innovation, quality and reliability that customers have come to expect.The OmniCure S2E Ethernet adapter enables production facilities to join a new era of connectivity with the ability to remotely access…
Product
Radiometry is an essential technique for measuring light output from a UV curing system in order to maintain a repeatable process. The OmniCure® R2000 UV Radiometer can be combined with the OmniCure S2000 UV Curing System to provide a complete curing station with unmatched control and repeatability. Special electronics built into the R2000 also allow for the connection of custom sensors that measure light energy directly at the cure site or within cure ring bonding fixtures.
Product
The OmniCure® S1500 Pro is a revolutionary UV spot curing system designed for automated manufacturing. The S1500 Pro offers industry-leading control, reliability, and high-intensity irradiance. With a versatile array of features, this UV Curing system is tailored to meet the demands of diverse manufacturing applications, ensuring optimal performance without compromise. Explore the next level in precision curing with the S1500 Pro.
Product
The OmniCure® S Series offers a variety of light guides ranging from single and multi-legged to liquid-filled or fiber light guides, as well as a range of optical adapters to best meet customer requirements.
Product
The Semray® 5000+ UV LED Water-Cooled System is designed to deliver exceptional printing results. It is ideal for industrial and larger print applications that require greater working distances from the substrate. This water-cooled UV LED curing light source provides up to 30% more active UV energy to the printed product, enabling faster printing speeds and the ability to print on heat-sensitive materials. In addition to reducing energy consumption, this system boasts a…
Product
The FireLine™ FL440 compliments the FireLine product series by delivering unparalleled total UV energy. This advanced system provides customers with a scalable, IP66-compliant solution that offers superior performance for curing applications requiring maximum UV output. This water-cooled UV LED curing system is ideal for applications requiring maximum UV power and exposure. The FireLine architecture allows for the system to be customized to various lengths based on printing requirements.
Product
The FireLine™ FL400-i Industrial UV LED Area Curing System is specifically designed for demanding industrial coating and adhesive curing applications. It features a robust, ruggedized housing suited for challenging environments. This UV LED solution provides exceptional optical uniformity, ensuring consistent and reliable curing performance. The powerful FireLine FL400-i Industrial is also IP66-compliant, making it ideal for tasks that require high UV LED output.
Product
The FireLine™ FL400 UV LED Area Curing System is designed for the most challenging printing, coating, and adhesive curing application environments and now features enhanced performance. This UV LED solution is scalable, allowing for custom length options, and offers exceptional optical uniformity, ensuring consistent and reliable curing for demanding industrial applications. The powerful FireLine FL400 delivers a scalable, IP66-compliant solution designed for tasks that require high UV LED…
Product
The FireLine™ FL200 is a compact and scalable light source that operates with a separate controller. The lamps can be scaled to various lengths and provide exceptional optical uniformity, ensuring consistent and reliable curing for even the most demanding applications.
Product
Excelitas provides custom UV curing systems for various processes and applications. Our offerings range from single lamp modules to complete turnkey systems that include multiple lamp modules, light shielding, material handling, and controls. These tailored UV curing solutions are designed to meet specific application requirements, ensuring successful integration into both existing and new production lines.
Product
The Excelitas ultra-low-power DigiPyro® PYD 2597 detector operates at just 1.4 V. This fully integrated, two-element pyro detector is made from RoHS-compliant materials and is designed to maximize battery life, making it suitable for remote motion-detection applications. Featuring Excelitas’ signature Wake-Up mode, this detector consumes only 2 µA at 1.8 V, further extending battery life for remote motion detection.
Product
The Excelitas Development Series Capacitor Charging Power Supplies are high-voltage platforms designed to support rapid prototyping, system evaluation, and early-stage development of advanced laser and high-energy systems. Available in three power variants, 2kW, (XLS202), 3 kW (XLS302), and 4 kW (TLX402), these platforms provide flexible high voltage solutions that simplify integration and provide access to Excelitas engineering support to reduce development time, mitigate risk, and enable…
Product
Excelitas TPiD 1T 0224 / 0624 Thermopile Detector Series features a TO-39 housing containing a sensitive chip and small aperture optical window. This Thermopile Series provides exceptional ISOthermal performance for improved thermal shock resistance.
Product
The VTA1216H-H-SC-01-0 is a 1.2mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with the VTA1216H-L series of photodiode arrays for low energy detection.