SEARCH RESULTS (1632)
Product
Excelitas Linear Excimer Lamps produce eye safe narrow band 222nm UV-C wavelengths, achieving excellent lifetimes and output with materials optimized for working in the UV-C. Electrode life is maximized by isolation from the plasma discharge. While standard linear sizes are available, we also offer customized co-axial excimer lamp geometries upon request.
Product Category
The Excelitas CoolEYE™ IR Line Arrays offer versions with 8 or 16 pixels for various non-contact temperature measurement applications such as room climate control and presence detection. They feature a temperature calculation at sensor level for all pixels and a measurement of the sensor’s temperature itself. Different field-of-views are available.
Product
The -40 kilovolt, 25 mA 1 kilowatt power supply incorporates a high frequency quasi-resonant switch-mode design utilizing an IGBT based power inverter with a completely air insulated high voltage section. The fault tolerant design of this system offers open and short circuit protection. Low stored energy, a benefit of the high frequency switching design, provides fast response to transients and enhanced protection for the load and equipment operators.
Product Category
The InGaAs PIN Detectors provide high quantum efficiency from 800 nm to 1700 nm. They feature low capacitance for extended bandwidth, high resistance for high sensitivity, high linearity, and uniformity within two percent across the detector active area.
Landing Page
PaintExpo is a leading showcase for innovations, applications, and emerging trends in industrial coating. Visit Excelitas at Booth 1243 in Hall 1 to explore advanced UV LED curing and infrared (IR) drying solutions designed to help manufacturers increase production efficiency, reduce energy consumption, and maintain consistent, high-quality coating results.
At the booth, our experts will demonstrate how UV and IR technologies support a wide range of applications, including fast, energy-…
Product
The VTA2516H-H-SC-01-0 is a 2.5 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA2516H-L Series of photodiode arrays for low energy detection.
Product
Excelitas offers the A-Zoomµ Micro®, single-objective, analytical probing microscope for value-added wafer imaging. Its compact, single-objective design eliminates cumbersome nose-turret manipulation improving wafer probing throughput.
Product
The VTA2516H-L-NC-00-0 is a 2.5 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA2516H-H Series of photodiode arrays for high energy detection.
Product
The VTA2516H-H-NC-00-0 is a 2.5 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA2516H-L Series of photodiode arrays for low energy detection.
Product
The VTA1616H-L-NC-00-0 is a 1.6 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1616H-H Series of photodiode arrays for high energy detection.
Product
The VTA1616H-H-NC-00-0 is a 1.6 mm pitch, 16-element Photodiode Array meant for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1616H-L Series of photodiode arrays for low energy detection.
Product
The FFD-100H is a Large-Area Silicon PIN Photodiode with a 2.5 mm active diameter in a hermetically-sealed TO-5 package. This photodiode produces high responsivity from 400 nm to 1150 nm with a peak responsivity at 920 nm. It features an ultra-fast rise and fall time, low NEP and a low operating voltage.
Product
The VTA2516H-L-SC-03-0 is a 2.5 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA2516H-H Series of photodiode arrays for high energy detection.
Product
The VTA1616H-L-SC-03-0 is a 1.6 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1616H-H Series of photodiode arrays for high energy detection.
Product
The VTA1616H-H-NC-00-0 is a 1.6 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1616H-L Series of photodiode arrays for low energy detection.
Product Category
Our high-performance water-cooled UV curing systems are built to be durable and dependable, making them suitable for even the most challenging environments with extreme temperatures and debris. Additionally, these water-cooled lamps operate quietly, making them an excellent choice for situations where low noise is a priority.
Product
The VTA1216H-L-NC-00-0 is a 1.2 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1216H-H Series of photodiode arrays for high energy detection.
Product
The VTA1216H-H-NC-00-0 is a 1.2 mm pitch 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1216H-L Series of photodiode arrays for low energy detection.
Product
The VTA1216H-L-SC-03-0 is a 1.2 mm pitch 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with the VTA1216H-H series of photodiode arrays for high energy detection.
Product
The VTA1216H-H-SC-01-0 is a 1.2mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with the VTA1216H-L series of photodiode arrays for low energy detection.
Product
The C30741PFH-15S is a High-Speed Silicon PIN Photodiode with a 1.5 x 1.5 mm active area chip in a T1 ¾ visible-blocking plastic package.
Product
The C30741PH-15S is a high-speed Silicon PIN photodiode with a 1.5 x 1.5 mm active area chip in a T 1¾ clear plastic package.
Product
LINOS® F-Theta-Ronar lenses are designed to achieve aberration-free imaging for UV laser wavelengths between 340 – 360 nm, enabling exceptionally small spot diameters across the entire flat image plane. All lenses are made of premium fused silica for high-power and ultrashort-pulse laser material processing equipped with a sophisticated broadband and angle-optimized coating. A wide variety of focal lengths and telecentric designs are available, making LINOS F-Theta-Ronar lenses suitable for a…
Product
Excelitas offers flashlamp designs suitable for the professional photography market. Our flashlamps provide highly stable light output and high efficiency to address the unique requirements of the most demanding photographers. With the flexibility to select shapes, electrodes and custom glass caps, Excelitas provides customization to meet your flashlamp specifications.
Product
The VTE3375LA is a 880 nm GaAlAs Infrared Emitting Diode (IRED) mounted in a long T-1 (3mm diameter) lensed plastic package. With a narrow beam angle of ±12.5°, this IRED is suitable for smoke detection, IR illumination and optical switching applications.
Product
The VTE3374LAH is a 880 nm GaAlAs Infrared Emitting Diode (IRED)mounted in a long T-1 (3 mm diameter) lensed plastic package. With a narrow beam angle of ±10°, this 880 nm GaAlAs IRED is suitable for smoke detection, IR illumination and optical switching applications.
Product
The VTE1291-2H is a GaAlAs Infrared Emitting Diode (IRED) mounted in a T 1¾ (5mm diameter) lensed plastic package with a narrow beam angle. This 880 nm GaAlAs IRED has a narrow emission beam profile, a characteristic making it suitable for smoke detection, IR illumination and optical switching applications.
Product
The VTE1291-1H is a GaAlAs Infrared Emitting Diode in a lensed, plastic package with a narrow beam angle. This 880nm GaAlAs infrared emitting diode (IRED) is mounted in a T 1 ¾ (5mm diameter) lensed plastic package. This IRED has a narrow emission beam profile suitable for smoke detection, IR illumination and optical switching applications.
Product Category
Benefit from over 30 years of experience in the development of optical systems for laser material processing!Our broad selection of manual and motorized LINOS® Beam Expanders and comprehensive range of LINOS F-Theta-Ronar and Focus-Ronar lenses are engineered to meet the most stringent requirements. We will serve you from development and prototyping to volume production, as well as partner with you during the full lifetime of your product. From premium off-the-shelf Laser…
Product
Our Smart Vacuum UV (VUV) Control System is specifically designed for effective aerosol treatment in kitchen exhaust fans and hoods. This UV control system utilizes a VUV lamp that emits light at a wavelength of 185 nm, which effectively breaks down, destroys, and neutralizes grease and odors. This process significantly reduces fire risks and maintenance costs.
Editorial
FUTUREPRINT Magazine features an article from Excelitas that explores how UV-curable inks and UV LED curing systems are advancing inkjet printing for fiber optic and electrical cable marking. The piece outlines the end-to-end process and highlights key considerations for optimizing ink adhesion. It also includes a link to a companion webinar, co-presented by Excelitas, Gem Gravure and Enercon, showcasing real-world solutions for consistent, high-quality marking across a range of cable…
Product Category
Noblelight was established in 1992 and has a rich history of patented lamp technology dating back to 1904. Acquired by Excelitas in 2024, Noblelight is a recognized leading technology brand worldwide with a comprehensive array of infrared emitters, flash lamps, UV and UVC lamps, UV curing systems and accessories, and specialty lighting solutions. These products span the wavelength spectrum from ultraviolet to infrared, making them ideal for a variety of applications, including industrial…
Product Category
Our High Spatial Radiance (HSR) Deuterium Lamps are designed with patented technology that significantly enhances Deuterium lamp (D2 lamp) output. A 50% increase in output can be achieved in optimized systems when compared to D2 lamps currently available on the market. This improvement allows for a much better signal-to-noise ratio for increasingly demanding applications. Our new HSR Lamp technology represents a significant leap forward in the field, offering unprecedented brightness and…
Product
The VTD31AAH is a silicon photodiode on ceramic substrate coated with clear epoxy, and a CLD31AA industry equivalent. This photodiode provides a low dark current, fast response and wide field-of-view.
Product
The VTD206H is a silicon photodiode in TO-92 side-looker package with visible blocking, and an SFH206 industry equivalent. This photodiode provides a low dark current, fast response and wide field-of-view.
Product
The VTD205H is a silicon photodiode in TO-92 side-looker package with visible blocking, and an SFH205 industry equivalent. This photodiode provides a low dark current, fast response, and wide field-of-view.
Product
Excelitas offers fully customizable LED solutions for the most critical medical applications while leveraging a unique combination of innovative technology and application expertise. With a broad range of solutions from Chip-on-Board LED and sensor components to complete solid state illumination system implementation, we are focused on helping customers accelerate LED lighting designs to their specific application requirements.
Product
The SPCM-AQ4C is a four-channel photon counting module capable of detecting single photons of light over the wavelength range from 400 nm to 1060 nm. Each channel is independent from the others.
Product
Excelitas offers infrared (IR) boosters to help augment existing drying systems and optimize the heating process as production demands increase. The IR booster is typically placed in front of an existing drying system from where it rapidly brings the product up to temperature allowing line speeds to increase accordingly. This process can equate to a 50% savings in time required to dry or cure the coating on a particular product. Learn more about this solution.
Product
Excelitas' newly enhanced SPCM-AQRH Single-Photon Counting Module detects single photons over the wavelength range of 400 nm to 1064 nm with performance parameters superior to other solid state or vacuum-tube based photon counters.
Product
Excelitas offers a variety of lens mount adapters to enable seamless camera integration into your imaging system. Available lens mount interfaces include C-mount, F-mount, TFL-mount and EF-mount.
Product
Excelitas continues to provide technical support for a number of discontinued PCO Scientific Cameras. Software and user manuals are available for download via our website. Refer below for a list of supported PCO cameras.
Product
The pco.edge 5.5 is a high resolution cooled sCMOS camera utilizing a CLHS interface and 10G FOL (Camera Link HS) to allow direct processing of large data transfers via a computer making it easy to securely bridge distances of up to 10 km. This camera is equipped with a 16-bit scientific CMOS sensor for capturing crisp images and precise measurements. The pco.edge 5.5 camera also comes with an option to upgrade with a water cooling system.
Product Category
Our C30724 Series of APDs provide high responsivity in the wavelength range of 800 to 950 nm and are designed to meet the needs of high-volume and low-cost applications. The C30724EH is in a hermetically-sealed TO-18 can. The C30724EH-2 is a modified TO-18 with a built in 905 nm narrow band pass filter. Lastly, the C30724PH is in a TO-18 plastic encapsulated package.
Product
The C30739ECERH-2 Short-Wavelength, Enhanced Silicon Avalanche Photodiode (Si APD) covers the spectral range from less than 400 nm to greater than 700 nm. With low noise, high gain, low capacitance and an enhanced UV-response with a quantum efficiency above 70% at 430 nm, this Si APD is designed for low-light level applications such as molecular imaging. Its ceramic carrier package allows for easy handling and coupling to scintillation crystals such as LSO and BGO.
Product Category
Excelitas offers high-quality Deuterium (D2) lamps available in both quartz and UV glass bulbs. Using the latest material and process technologies, these D2 lamps have a lifetime of 2000 hours or more and offer unmatched output stability, intensity and long lifetime. Our patented High Spatial Radiance technology significantly enhances output by 50% compared to current D2 lamps in the market. Additionally, we offer our FiberLight D2 specialty light modules, which are ideal for…
Product Category
Excelitas is the leading provider of off-the-shelf and customer-specific YAG-enhanced terminal guidance detectors. Applications include precision munitions, target acquisition, laser spot tracking, and missile guidance. Our wide range of devices offer high speed, responsivity, and quantum efficiency for photon detection from 400 up to 1700 nm.
Product
The C30807EH is a high quality N-type Silicon PIN Photodiode with a 1.0 mm active diameter chip in a hermetically-sealed TO-18 package designed for the 300 nm to 1100 nm wavelength range. This product series features a broad range of photosensitive surface areas from 0.8 mm² to 100 mm².
Product
With the diameter of 4.7mm the PYD 5731 Miniature, Dual-Element DigiPyro® is one of the smallest designs in the Excelitas Pyrodetector portfolio. The PYD 5731 features two elements in a series connection within TO-46 Metal Housing and an optical window. This Detector is part of the DigiPyro family that feature internal integrated circuitry to convert the element signals into a 14-bit digital output.
Product
Amba® UV curing mercury arc lamps are designed for reliable curing results and come in various lengths and power classes. They are ideal for use as replacement lamps in applications such as printing, wood coating, and many other UV curing processes. OEM designers turn to us for comprehensive technical consulting and in-house testing capabilities.
Editorial
John Wallace’s article in the May issue of Laser Focus World provides a background on some commercial examples of current lens-design software packages, including Excelitas’ powerful, intuitive simulation program for designing optical imaging systems.
Product
The C30724EH-2 Silicon Avalanche Photodiode (Si APD) provides a 905 nm filter and low-temperature coefficient in a metal TO-housing.
Product
The C30916EH Large-Area Silicon Avalanche Photodiode provides a 1.5 mm active area diameter in TO-5 housing.
Product Category
The performance and quality demands asked of power supplies used for ion implantation within the semiconductor device fabrication, metal finishing, as well as in materials science research markets are unrivaled. The power supplies and technologies employed within our family of supplies offers the performance and quality required to meet the demanding requirements of these applications.
Product
The LINOS® F-Theta-Ronar Blue Line lenses are designed to achieve aberration-free imaging over the entire flat image plane for laser wavelengths between 440 – 460 nm. Exceptionally high entrance beam diameters allow minimum spot size in the image plane. All lenses are made of premium fused silica for high power laser material processing equipped with a sophisticated broadband and angle optimized coating.
Product
The C30822EH is a Silicon PIN Photodiode with a 5.0 mm active diameter chip in a hermetically-sealed TO-8 package designed for the 300 nm to 1100 nm wavelength range. This product series features a broad range of photosensitive surface areas from 0.8 mm² to 100 mm².
Product
The LINOS® LM13 Laser Modular Series is a compact, high-performance electro-optical modulator based on KD*P technology designed for precision laser control. This modulator is engineered to effectively control power, phase, or polarization state outside the laser cavity, offering exceptional flexibility. Its dual-crystal configuration compensates for natural birefringence, ensuring stable and accurate modulation. Ideal for demanding optical setups, the LM13 Series…
Product
The Excelitas TPD 1T 0226 IRA Thermopile Detector with integrated optics is available in "IRA" high metal can which includes an integrated reflector for collecting the radiation receipt.
Product
The Phoseon® KeyLight™ OEM light source is designed for microscopy and fluorescent microscopy instruments to ensure reliable and accurate laboratory results. KeyLight utilizes proprietary and patented LED technology, providing users with a powerful solution that delivers precise and consistent UV output. LEDs are known for being low-noise, stable, cool, and controllable. Additionally, KeyLight features a compact design, offering your lab an advantage without compromising…
Product Category
Excelitas offers a wide range of precision prisms using a variety of substrate materials including sapphire, optical glasses, fused silica, Si, Ge, ZnSe, ZnS, CaF2, MgF2, Cleartran and AMTIR. Our sophisticated controlled fabrication and coating technology is used to consistently deliver superior performance while the use of our full suite of advanced metrology instruments enables us to achieve and verify arc second level angle accuracy.
Product Category
The pco.panda series represents our product family of compact scientific CMOS (sCMOS) cameras. These cameras feature optimized passive thermal management housing to enable high sCMOS image sensor performance in the most compact form factor. Furthermore, additional optional features such as low light mode, light sheet scanning mode, or double shutter technology are available to enhance the cameras’ performance further for greater versatility.
Product
This Dual-Element Pyrodetector features two standard elements in parallel connection designed into a compact SMD (surface mount) housing with optical window. In alignment with our innovative low power DigiPyro detectors family, this design streamlines integration to the host system with significantly reduced form factor. The integrated motion detection unit and interrupt features are perfect for battery operated applications.
Product
The PVGS2S06H is a metal packaged, high efficiency 1550 nm pulsed laser diode, comprised of a dual stack, single cavity chip with a 150 µm stripe width. It provides 24 W @ 20 A tested with a 150 ns wide pulse, and is offered in various other packages.
Product
The PVGS1S06H is a metal packaged, high efficiency 1550 nm pulsed laser diode, comprised of a single stack, single cavity chip with a 150 µm stripe width. It provides 7 W @ 20 A tested with a 150 ns wide pulse, and is offered in various other packages.
Product
The PVGR1S06H is a metal packaged, high efficiency 1550 nm pulsed laser diode, comprised of a single stack, single cavity chip with a 150 µm stripe width. It provides 7 W @ 20 A tested with a 150 ns wide pulse, and is offered in various other packages.
Editorial
The increasing demand for high-power lasers (100 W up to kilowatts) in laser materials processing presents a technical challenge for optical components such as f-theta lenses, beam expanders, and Faraday isolators. As a result, thermally induced beam-degradation effects are playing an increasing role in a variety of high-power laser and related applications.
Editorial
Fiber optic cables are essential components of modern telecommunications infrastructure. These cables consist of multiple fiber optic cores, fiber optic bundles, bundling material, rip cord and even electrical conductors.
Product
The PVGR4S12H is a metal packaged high efficiency 1550 nm pulsed laser diode, comprised of a quad stack, single cavity chip with a 300 µm stripe width. It provides 58 W @ 40 A tested with a 150 ns wide pulse, and is offered in various other packages.
Product
The PVGR2S06H is a metal packaged, high efficiency 1550 nm pulsed laser diode, comprised of a dual stack, single cavity chip with a 150 µm stripe width. It provides 24 W @ 20 A tested with a 150 ns wide pulse, and is offered in various other packages.
Product
The VTD206KH is a silicon photodiode in TO-92 side-looker clear package, and an SFH206K industry equivalent. This photodiode provides a low dark current, fast response and wide field-of-view.
Product
The VTD205KH is a silicon photodiode in TO-92 side-looker clear package and a SFH205K industry equivalent. This photodiode provides a low dark current, fast response and a wide field-of-view.
Product
The VTB1113BH is a silicon photodiode in a hermetic TO-46 lensed package with a narrow field-of-view. This photodiode offers a built-in IR rejection filter to limit the response into the visible portion of the spectrum, as well as exhibits a very high shunt resistance and a low dark current.
Product
The VTB1012BH is a silicon photodiode in a hermetic TO-46 flat window package. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
Product
The Excelitas TPG3AU1S1.5 is a compact and powerful 905 nm pulsed laser diode that delivers an optical output of 16 W at just 6 A, making it ideal for Time-of-Flight, LiDAR, and 3D sensing applications. With a small 40 ×10 µm emission area, it enables tight beam collimation for high-resolution detection. The 9.3 V forward voltage ensures efficient operation with reduced thermal load. Designed for reliability in a hermetic TO-can, this diode is perfect for industrial environments, offering…
Product
The VTB6061BH is a silicon photodiode in a hermetic TO-8 flat window package. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
Product
The VTB6061CIEH is a silicon photodiode in a hermetic TO-8 flat window package. This photodiode has a built-in filter so its spectral response closely matches that of the human eye. It exhibits a very high shunt resistance and a low dark current.
Product
The VTB6061CIEH is a silicon photodiode in a hermetic TO-8 flat window package. With a built-in filter that allows its spectral response to closely match that of the human eye, this photodiode exhibits a very high shunt resistance and a low dark current.
Product
The VTB1013BH is a silicon photodiode in a hermetic TO-46 flat window package. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
Product
The Excelitas CIPRM Series of balanced optical receivers features our high-performance InGaAs photodiodes and a low noise, high gain transimpedance amplifier to offer a practical solution to detect small changes above the interfering noise floor of incoming optical signals. The advantage is that the common optical noise is cancelled out.
Product
The VTB1112BH is a silicon photodiode in a hermetic TO-46 lensed package with a narrow field-of-view. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance, a low dark current.
Product
The VTB8440BH is a blue-enhanced silicon photodiode in a 8 mm recessed ceramic package protected with a clear epoxy layer. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
Product Category
Optem Long Working Distance Microscope Objectives are the perfect machine vision and industrial imaging solution when you need added magnification and resolving power without compromising working space around your subject. Select from the complete line of Optem M Plan APO Objectives when flat-field precision, color accuracy and even illumination are critical. The Optem M Plan APO Objectives introduce a novel optical design optimized to meet the apochromatic flat-field demands of large-format…
Product
The VTB8441BH is a blue enhanced silicon photodiode in a 8mm recessed ceramic package protected with a clear epoxy layer. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
Product
The VTB5051BH is a silicon photodiode in a hermetic TO-5 flat window package. With a built-in IR rejection filter to limit the response into the visible portion of the spectrum, this photodiode exhibits a very high shunt resistance and a low dark current.
Product
The VTH2120 silicon photodiode with a 100 mm2 active area is offered in chip form for optimal alpha particle detection, such as radon gas detection applications. This photodiode provides an enhanced response to radiation of interest, with a radiation robust chip design and a large active area of 10x10mm.
Product
The X-Cite® Vitae vIRX is a fully customizable, multi-wavelength illumination platform designed for high precision medical illumination and diagnostic applications such as endoscopy and surgical visualization, as well as high-speed analytical applications including multi-well plate and slide scanning and polymerase chain reaction (PCR). Featuring high optical output with support for up to 7 wavelengths including NIR, the Vitae vIRX easily replaces 180W or 300W Xenon sources while…
Product Category
Excelitas has a complete range of standard chip–on-board package designs as well as fully custom designed chip-on-board (COB) solutions. Our three main platforms, the ACULED, APOLED and CERLED allow users to select from a wide range of wavelengths, various CCT whites and high color rendering selections.
Product
The FireEdge™ FE400 air-cooled UV LED curing system offers advanced features with maximum flexibility. It includes built-in intensity control options, enabling it to be used for both full-cure and pinning applications by delivering high UV power. This system provides process stability thanks to the patented TargetCure™ technology, which ensures precise and predictable UV output. Its unique scaling feature allows multiple units to be stacked end-to-end, resulting in contiguous and uniform UV…
Product
Our LINOS® Singlets are available in a wide range of focal lengths and diameters, allowing you to select the ideal components for your application. We use only premium materials from trusted manufacturers and maintain strict tolerances to ensure exceptional quality. Each lens is offered in both a mounted version with a high-quality, black-anodized, engraved aluminum mount and an unmounted version for flexible integration.
Product
The compact iFLEX-Agile® combines various cw-OPO modules and pump-sources to deliver exceptionally broad wavelength tunability in different ranges from NIR to MIR with various emission linewidths and power levels.
Product
OmniCure® AC9 Series are high-power UV LED Curing Systems delivering over 14 W/cm2 peak irradiance for fast curing of inks, adhesives and coatings. Consisting of the AC9150, AC9150P, AC9225, AC9225P, AC9300 and AC9300P, the AC9 Series are high-performing, air-cooled solutions with a small form-factor to enable fast line speeds in industrial manufacturing and printing.
Product
Excelitas’ C30902SH Avalanche Photodiodes are high speed, large area Silicon APDs that provide high responsivity at low noise. They are specially selected to be used either in Geiger Mode (VOP > VBD) for detection of single photons or Linear Mode (VOP < VBD) with gains up to 250.
Product
The C30954EH Long-Wavelength, Enhanced Silicon Avalanche Photodiode (Si APD) provides a 0.8 mm active area diameter and high quantum efficiency at 1060 nm. Designed in a TO-5 package, this Si APD is made using a double-diffused "reach-through" structure. Its long-wave response of >900 nm has been enhanced without introducing any undesirable properties.
Product Category
The Excelitas Hybrid Optical APD Receiver Modules are comprised of a photodetector (PIN or APD) and a transimpedance amplifier in the same hermetically sealed package. Having both an amplifier and photodetector in the same package allows low-noise pickup from the surrounding environment and reduces parasitic capacitance from interconnect allowing lower-noise operation.
Product
OmniCure® AC7 Series of air-cooled UV LED curing systems are suitable for large-area curing. Designed with high-output LEDs and custom optics, the AC7150 and AC7300 systems deliver over 5 W/cm2 peak irradiance and exceptional uniformity over the entire curing area. The AC7 Series provides high longitudinal uniformity to ensure consistent and repeatable curing of all parts over the entire 150 mm (6") to 300 mm (12") curing area.
Application Category
Modern manufacturing is an on-going photonics revolution. Light can be used by computers to process or measure materials with no surface contact, no contamination and no wear of tool edges in the smallest of scales and over large areas. Photonics-enabled light is used to produce the devices that are ubiquitous in modern lives, to protect our health and environment, and keep us safe. Light-based machine vision and automated optical inspection systems make it possible to inspect a…
Application Category
Excelitas products size, map, detect, time, and measure with precision that aids humanity's understanding and research in a broad range of scientific applications in astronomy, life sciences, physics and more. Excelitas offers precision lenses used for imaging from the cellular to interstellar. Our detectors are sensitive enough to detect single photons in laboratory experiments or from distant galaxies. And, we offer lasers with the beam profile and stability that ensure…
Product
The C30817EH Silicon Avalanche Photodiode for general-purpose applications is designed using a double-diffused “reach through” structure. This structure provides high responsivity between 400 to 1100 nm, as well as fast rise and fall times at all wavelengths. Since the fall time characteristics has no “tail”, the responsivity of the device is independent of modulation frequency up to about 200 MHz.
Product
Excelitas offers an extensive selection of LINOS® Singlets in a wide variety of focal lengths and diameters, helping you identify the ideal components for your application. We use only premium materials from trusted manufacturers and maintain the tightest possible tolerances to guarantee exceptional quality. Each standard lens features a double-sided narrow-band anti-reflection coating optimized for the central YAG wavelength of 1064 nm, ensuring maximum transmittance. You can…
Application
Excelitas has extensive experience in the conceptualization, design and production of laser beam delivery systems for femtosecond laser refractive surgery in the cornea as well as the crystalline lens.
Product
Based on a flexible LED module design with extensive wavelength multiplexing capabilities, the X-Cite Vitae™ 6 is multi-wavelength platform with high output power and efficient thermal management is available for maximum spectral breadth and stability. Systems can be customized with up to six LEDs and excitation filters to cover a wide range of imaging, diagnostic and analytical applications. With a range of wavelengths from 360-740 nm, the X-Cite Vitae 6 offers high speed…
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with our X-Cite® XYLIS LED illumination system. Replacement lamps, light guides and technical support for the exacte product will continue to be available.
Product
The Optem® FUSION system controller provides seamless integration and control of illumination, focus, and zoom modules across the Optem FUSION micro-inspection platform. This intuitive plug-and-play controller brings simplified system-level automation to the field-proven modular FUSION system...
Product
The LINOS® MeVis-C/CF-Mount traffic lenses feature optimized color correction to eliminate focus shift between daylight and NIR illumination at approximately 850 nm. This optimized optical design eliminates the need for refocusing when switching between wavelengths, as the focal plane is identical for both illumination instances. In addition, the field-proven and well-known mechanics of the MeVis-C and MeVis-CF lenses remain unchanged to ensure a robust lens ready for the most…
Application Category
Wide-ranging technologies for illumination, imaging and detection allow Excelitas to serve a breadth of medical applications: diagnostics, surgery, UVC Disinfection, dentistry, ophthalmology, and more. Our extensive capabilities for design and manufacturing, from components to systems, make Excelitas the ideal partner for medical OEMs with the most demanding requirements when quality, cost and ability-to-scale are critical. Excelitas laser, LED, and lamp solutions address…
Product
LINOS® DLHS NIR 1064 nm Dielectric-Coated Plane Mirrors are designed for high-power and high-energy laser applications. They deliver exceptional reliability and optical performance. Their advanced dielectric NIR coating resists laser-induced damage and ensures reflection above 99.8%. These mirrors are made for a 45° angle of incidence and provide precise 90° beam deflection. They also serve as short-pass or dichroic elements in complex optical setups.
Product Category
With over 100 years of experience in manufacturing high-quality optical components, LINOS plano-concave singlets deliver precision, reliability, and superior optical performance. Available in N-BK7 and fused silica, they come mounted or unmounted, coated or uncoated, as standard stock items for immediate use or as customized solutions to meet specific requirements.
Product Category
LINOS concave mirrors, derived from our plano-concave fused-silica lenses, deliver precise beam control and can be converted into high-quality spherical mirrors with single-sided metallic coating. For illumination systems, we offer standard concave front-surface mirrors and optional customized aspheric versions to optimize light distribution.
Product Category
Excelitas excimer lamps, manufactured as linear and module forms, generate eye safe narrow bandwidth 222nm ultraviolet light safely and efficiently. The 222nm wavelength is proven effective at combating a wide variety of microbes with long lifetimes, perfect for stand-alone systems or to be integrated into multiple modality disinfection solutions.
Product Category
Axsun Technologies was established in 1998 and acquired by Excelitas Technologies in early 2019. Excelitas’ Axsun product line utilizes an array of microelectromechanical systems (MEMS) and other micro-scale optical devices to manufacture industry-leading technology.Our Axsun optical integration technology is leading the way toward higher performance, more compact, more reliable, and more cost-effective subsystems and solutions in a variety of applications – from guidance…
Product Category
The Optem® FUSION Modular Microscopy platform is the next generation of microimaging lens systems for high precision, high magnification applications across Visible to SWIR wavelengths. An extensive range of ready-to-use modules make it the most comprehensive lens system on the market. Whether for high-throughput automated inspection or high-resolution defect detection, the system is designed to meet the evolving needs of today’s OEM micro-imaging applications. The Optem…
Landing Page
AMTS is a leading professional exhibition in the automotive engineering industry. AMTS showcases a diverse range of products and solutions in automotive manufacturing including car body stamping, welding and joining, painting, automotive assembly, auto parts machining engineering, assembly and testing, automotive materials and design, automotive development and trial production, intelligent production line logistics, quality control and testing and other fields.
Automotive Manufacturing…
Product
Excelitas offers a wide selection of camera mounts within the Optem® FUSION product portfolio to support almost any standard camera format. Our camera mounts allow for easy connection of your imaging sensor to the FUSION system.
Application
Excelitas provides technology that enables powerful lasers used in a wide variety of applications in industrial manufacturing, defense, medicine, and science that require marking, cutting, drilling, heating and welding.
Product
Excelitas offers a wide selection of LINOS® Singlets in multiple focal lengths and diameters for diverse applications. Only premium materials from trusted manufacturers are used, and strict tolerances are maintained to ensure quality. Each standard lens features double-sided anti-reflection coatings optimized for the visible wavelength range to enhance transmittance. Lenses are available mounted in a black-anodized, engraved aluminum housing or unmounted for flexible integration.
Product Category
With our rich electro-optic heritage, Excelitas manufactures a range of premium performance laser sources to meet your laser engine requirements. From Solid State Diode to Helium Neon... from Pulsed Laser Diodes to Swept-Source OCT Tunable Laser Engines... from Xenon Flash laser pumping to High-Voltage Power Supplies... whether your requirement is off-the-shelf or custom engineered, engage our laser expertise for your next solution.
Product
Excelitas offers a wide selection of LINOS® singlet lenses. Options cover a range of focal lengths and diameters to help you find the right components for your application. Only premium materials from trusted manufacturers are used, following the tightest tolerances for exceptional quality. Each standard lens has double-sided broadband anti-reflection coatings across the near-infrared (NIR) wavelength range. Lenses are available mounted in high-quality, black-anodized, engraved…
Product
The BlueLight® Dairy UVC Flash Disinfection system is designed to integrate seamlessly with filling and sealing machinery. Its powerful modules effectively irradiate various configurations of pot carriers and cell plates. This system's modular design minimizes downtime and simplifies maintenance. Its compact footprint makes it ideal for applications with limited space.
Product Category
LINOS® MeVis-C Lenses are developed explicitly for the highest-resolution sensors up to a one-inch diameter. Exceptional resolution is combined with low distortion, minimal light fall-off, and excellent chromatic correction and color rendition across 450 - 900 nm. Designed with a high numerical aperture and an exceptional resolution of less than two (2) µm across the entire sensor, the LINOS MeVis-C Lenses ensure optimal performance for the most demanding applications.
Product
Our Optem® FUSION Camera Tubes are available in a wide range of magnifications, allowing for fine-tuning of the system and optimizing the performance to your image sensor. Available in both standard and mini formats, it ensures the performance is maximized optically and geometrically for nearly any application.
Product
Our Optem® FUSION infinity-corrected lower lenses are precision-engineered to optimize optical performance over extended working distances. With seamless integration and rapid swap-out capability, the lower lenses enable fine-tuning resolution, working distance, and system magnification to meet specific application needs.
Product
The BlueLight® Small Area UVC Flash Disinfection System provides a fast, reliable, and eco-friendly solution for disinfection without the use of harmful chemicals or mercury-based light sources. This system achieves a reduction of more than 4 logs in microbial load, operating efficiently at high throughputs of up to 500 square meters per hour. Originally designed for disinfecting food packaging, such as beverage bottle caps, this BlueLight system is also effective on other surfaces…
Product
Excelitas offers a vast selection of Optem® FUSION Lower Function Modules that are the basis for adding key functionality to your imaging system. These modules are designed to allow the integration of different lighting techniques, add manual or motorized focus movement, and expand on additional capabilities to your imaging solution.
Product Category
This Series of Infrared Emitting Diodes (IREDs) consists of three standard chips in nine different packages, providing a broad range of mounting, lens, and power output options. This series includes both end and side radiating cases, as well as narrow and wide angle emitters. All IREDs use high efficiency GaAlAs liquid phase epitaxial chips mounted P side down for highest output at 880 nm.
Application
Composite materials are fabricated in various ways depending on their intended applications, including automotive, aerospace, wind energy, construction and infrastructure. Infrared (IR) heat is often used in this manufacturing process due to its fast, uniform heating and reliable curing performance.
Product
The C30737LH-500-92N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 500 µm with enhanced 900nm response and a 905 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-230-83N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 230 µm, enhanced 800nm response and 650 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-230-81N Silicon Avalanche Photodiode (SI APD) provides enhanced 800 nm response with an active diameter of 230 µm and a 635 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The -25 kV, 10 mA 250 Watt power supply incorporates a high frequency quasi-resonant switch-mode design utilizing an IGBT based power inverter with a completely air insulated high voltage section. The fault tolerant design of this system offers open and short circuit protection. Low stored energy, a benefit of the high frequency switching design, provides fast response to transients and enhanced protection for the load and equipment operators.
Product Category
The Blue-Enhanced Series of P on N Silicon Planar Photodiodes are designed for optimum response through the visible part of the spectrum. Photodiodes from this series are primarily intended to be used in photovoltaic mode but can also be used with a small reverse bias. Versions with a UV transparent window or built-in IR filtering are available.
Product Category
Excelitas offers the A-Zoomµ Micro®, Single-Objective, Analytical Probing Microscope for value-added wafer imaging. Its compact, single-objective design eliminates cumbersome nose-turret manipulation improving wafer probing throughput. Designed for streamlined operation and compact integration onto a multitude of probing stations, the A-Zoomµ Micro offers a high-value solution for circuit board, semiconductor and flat-panel display probing without sacrificing features,…
Product
OmniCure® AC5 Series of air-cooled UV LED systems are designed for small area curing. With advanced front-end optics, these high power UV curing systems deliver 14 W/cm2 peak irradiance for fast, even curing. The Series includes the AC550, AC550P, AC575 and AC575P, with the P versions having enhanced optics to optimize the dose for short working distances along with a removable window for easy cleaning to support print applications.
Product Category
Excelitas offers a broad range of high-performance LINOS® Imaging Lenses specifically designed to address most any conceivable application in automated optical inspection and machine vision. If one of our many off-the-shelf products doesn't meet your needs, engage our experts to develop a custom solution for you.
Product
CERLED® was patented in 1979 as the world’s first Surface Mounted Device (SMD) LED. Excelitas offers an extensive range of standard CERLED products in UV, visible and infrared spectrum. In addition to offering LED products on a ceramic substrate with high thermal conductivity, the CERLED family also features CERLED phototransistors, photo-PIN diodes and wavelength selective photodiodes.
Product
1102502 series supply is a 125 kV/250 mA CT X-Ray PS is highly regulated Power Supply with high frequency power conversion technology used for all power supply functions. It is designed for a high-power rotating anode X-ray tube and produces -125 kV at 250 mA in a Standard Operational Mode, -130 kV at 10 mA in a Tube Conditioning Operational Mode.
Product
The FireLine™ FL400-i Industrial UV LED Area Curing System is specifically designed for demanding industrial coating and adhesive curing applications. It features a robust, ruggedized housing suited for challenging environments. This UV LED solution provides exceptional optical uniformity, ensuring consistent and reliable curing performance. The powerful FireLine FL400-i Industrial is also IP66-compliant, making it ideal for tasks that require high UV LED output.
Product
The PGAD1S03H is an SMD packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, single cavity chip with a 75 µm stripe width. It provides 8 W @ 10 A tested with a 50 ns wide pulse, and is offered in various other packages.
Product
The QPGEW1S09H is a plastic packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, quad cavity chip with a 225 µm stripe width. It provides 85 W @ 30 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The QPGEW1S03H is a plastic packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, quad cavity chip with a 75 µm stripe width. It provides 25 W @ 10 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The TPGAD1S03H is an SMD packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, triple cavity chip with a 75 µm stripe width. It provides 20 W @ 10 A tested with a 50 ns wide pulse, and is offered in various other packages.
Product
The TPGEW1S09H is a plastic packaged, high efficiency 905nm pulsed laser diode, comprised of a single stack, triple cavity chip with a 225 µm stripe width. It provides 70 W @ 30 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The TPGEW1S03H is a plastic packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, triple cavity chip with a 75 µm stripe width. It provides 20 W @ 10 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The DPGEW1S09H is a plastic packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, dual cavity chip with a 225 µm stripe width. It provides 45 W @ 30 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The DPGEW1S03H is a plastic packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, dual cavity chip with a 75 µm stripe width. It provides 13 W @ 10 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The PGEW1S09H is a plastic packaged high efficiency 905 nm pulsed laser diode, comprised of a single stack, single cavity chip with a 225 µm stripe width. It provides 23 W @ 30 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The PGEW1S03H is a plastic packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, single cavity chip with a 75 µm stripe width. It provides 6.5 W @ 10 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The QPGEW1S01.5H is a plastic-packaged, high efficiency 905 nm pulsed laser diode, comprised of a single stack, quad cavity chip with a 37.5 µm stripe width. It provides 10 W @ 5 A tested with a 100 ns wide pulse, and is offered in various other packages.
Product
The Phoseon 8th-generation Fiber Curing System features a three-part reflector assembly that improves the irradiance of the fiber by twenty percent, allowing for faster processing speeds. The Fiber Curing System uses a fiber-optimized UV LED light source combined with a patented reflector that directs UV light around the entire circumference of the fiber. A finely tuned light source and proprietary optics are used for UV LED curing, enabling improved process control and resulting in a…
Product
The Fusion UV LightHammer® 10 MARK III is a smart IoT ready, microwave-powered UV curing system with a 10 inch irradiator and 240 W/cm (600 W/in) power class.
Product
The FireLine™ FL400 UV LED Area Curing System is designed for the most challenging printing, coating, and adhesive curing application environments and now features enhanced performance. This UV LED solution is scalable, allowing for custom length options, and offers exceptional optical uniformity, ensuring consistent and reliable curing for demanding industrial applications. The powerful FireLine FL400 delivers a scalable, IP66-compliant solution designed for tasks that require high UV LED…