SEARCH RESULTS (1356)
Product
The C30703FH-200 Silicon Avalanche Photodiode (Si APD) with dimensions of 10 mm x 10 mm is designed for extremely large areas and offered in a flat pack suitable for radiation detection. The C30703 Si APD is enhanced for blue wavelength response and has a peak quantum efficiency at ~ 530 nm.
Product
OmniCure® S2000 Elite is a new generation of lamp-based UV spot curing systems designed and developed for the most demanding manufacturing applications. Offering highest reliability and quality for light curing adhesive processes, the OmniCure S2000 Elite redefines UV spot curing with enhanced productivity, precision, and security, while enabling next level control and usability.
Product
Radiometry is an essential technique for measuring light output from a UV curing system in order to maintain a repeatable process. The OmniCure® R2000 UV Radiometer can be combined with the OmniCure S2000 UV Curing System to provide a complete curing station with unmatched control and repeatability. Special electronics built into the R2000 also allow for the connection of custom sensors that measure light energy directly at the cure site or within cure ring bonding fixtures.
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with our X-Cite® XYLIS LED illumination system. Replacement lamps, light guides and technical support for the 200DC product will continue to be available.
Product
X-Cite® replacement lamps are available for use with our X-Cite 120Q Series, 200DC and exacte light sources. Our lamps are offered in either a 120 Watt or 200 Watt mercury arc lamp depending on your system model. The X-Cite replacement lamps come pre-aligned for easy installation and with a guaranteed life of 2000 hours. X-Cite replacement lamps are also available for online purchasing at Digi-Key.com.
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure S2000 Elite. Technical support for this product will continue to be available...
Product
The LLAM-900-R5BH is a high-speed, low-light analog Avalanche Photodiode (APD) Receiver with a 0.5 mm active diameter in a hermetically-sealed package. This Si APD Receiver features a thermoelectric cooler and offers a bandwidth of 200 MHz.
Product
The C30659 Series of Hybrid Optical APD Receivers includes a Silicon (Si) or InGaAs Avalanche Photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package to allow for ultra-low noise operation. Our C30659-1060-R8BH device has a C30954EH Si APD, optimized at 1060 nm and a 0.8 mm active diameter.
Product
The C30659 Series includes a Silicon (Si) or InGaAs Avalanche Photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to allow for ultra-low noise operation. Our C30659-900-R5BH device has a C30902EH Si APD with a peak response at 900 nm and 0.5 mm active diameter.
Product
OmniCure® PLC2000 programmable controller is designed to complement the OmniCure AC Series UV LED curing systems. When connected to an AC Series UV LED head, this multipurpose, external controller device allows you to intelligently manage, monitor and control an LED system. With unparalleled control of the UV LED systems, the PLC2000 can be used to dynamically adjust the output intensity, exposure time, and on/off capabilities while providing system information and error monitoring…
Product
The C30659 Series of InGaAs APD receivers includes a Silicon (Si) or InGaAs Avalanche Photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to allow for ultra-low noise operation.
Product
The C30659 Series includes a Silicon (Si) or InGaAs Avalanche Photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to allow for ultra-low noise operation. Our C30659-1060E-R8BH device has a C30954EH Si APD optimized at 1060nm and a 0.8 mm active diameter.
Product
The C30659 Series of InGaAs APD receivers includes a Silicon (Si) or InGaAs Avalanche Photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to allow for ultra-low noise operation. Our C30659-1550E-R08BH device includes a C30645EH InGaAs APD, optimized at 1550 nm.
Product
The OmniCure LS200 UV LED radiometry and calibration system ensures precise measurement and calibration of UV LED power or irradiance directly at the cure site, enabling manufacturers to control light output for a reliable and repeatable curing process. The LS200 features seamless integration with the LX500 UV LED Spot Curing System for calibration, and offers optional accessories, wide measurement range (1mW to 2000mW or 50mW/cm2 – 40 W/cm2), exceptional precision, and…
Product
The LLAM-1060-R8BH is a high-speed, low-light analog silicon avalanche photodiode (Si APD) receiver module with a 1060 nm Si APD. Featuring a thermoelectric cooler, this Si APD provides a 0.8 active diameter and a bandwidth of 200 MHz.
Product
The LLAM-1550-R08BH is a high-speed, low-light analog avalanche photodiode (APD) receiver module with a 1550 nm InGaAs APD and features a thermoelectric cooler.
Product
The C30659 Series includes a Silicon (Si) or InGaAs avalanche photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to allow for ultra-low noise operation. Our C30659-1550-R2AH device has a C30662EH InGaAs APD, optimized at 1550 nm.
Product
The LLAM-1060E-R8BH High-speed, low-light analog avalanche photodiode (APD) receiver module with a 1060 nm Silicon (Si) APD. Featuring a thermoelectric cooler, this Si APD provides a 0.8 mm active diameter and a bandwidth of 200 MHz.
Product
The LLAM-1550-R2AH is a high-speed, low-light analog avalanche photodiode (APD) receiver module with a 1550 nm InGaAs APD. This InGaAs APD receiver features a thermoelectric cooler and offers a bandwidth of 50 MHz.
Product
The LLAM-1550E-R08BH is a high-speed, low-light analog avalanche photodiode (APD) receiver with an active diameter of 0.08 mm and features a thermoelectric cooler.
Product
THe C30659 Series includes a Silicon (Si) or InGaAs avalanche photodiode (APD) with a hybrid preamplifier, in the same hermetically-sealed TO-8 package, to allow for ultra-low noise operation. Our C30659-1550-R2AH device includes an Excelitas C30662EH InGaAs APD, optimized at 1550 nm.
Product
Excelitas Technologies’ YAG series of Silicon PIN quadrant detectors are high-performance N-type or P-type Si PIN photodiodes in hermetically sealed TO packages.
Product
The LLAM-1550E-R2AH is high-speed, low-light analog avalanche photodiode (APD) receiver module with a 1550 nm InGaAs APD. Featuring a thermoelectric cooler, this APD Receiver Module offers a bandwidth of 50 MHz and high-damage threshold.
Product
The FireLine™ FL200 is a compact and scalable light source that operates with a separate controller. The lamps can be scaled to various lengths and provide exceptional optical uniformity, ensuring consistent and reliable curing for even the most demanding applications.
Product
Excelitas Technologies’ YAG series of Silicon PIN detectors are high-performance N-type or P-type Si PIN photodiodes in hermetically sealed TO packages.
Product
The FFD-200H is a Large-area Silicon PIN Photodiode with a 5.0 mm active diameter in a hermetically-sealed TO-8 package. This photodiode provides high responsivity from 400 nm to 1150 nm, with a peak responsivity at 850 nm. It also features an ultra-fast rise and fall time, low NEP and a low operating voltage.
Product
The VTP3410LAH is is a silicon photodiode in a visible blocking end-looking long T1 lensed package with an enhanced response in the near IR spectral range. This photodiode exhibits a very high shunt resistance, low dark current and low capacitance.
Product
The VTP3310LAH is a silicon photodiode in a clear end-looking long T1 lensed package. This photodiode provides an enhanced response in the visible and near IR-spectral range, as well as exhibits a very high shunt resistance, low dark current and low capacitance.
Product
The VTP7110H is a silicon photodiode in a lensed side-looking package with a fast response, low dark current and wide field-of-view.
Product
The VTP3410LAH is a silicon photodiode in a visible blocking, end-looking, long T1 lensed package. This photodiode provides an enhanced response in the near IR-spectral range, as well as exhibits a very high shunt resistance, low dark current and low capacitance.
Product
The C30703FH Series of Silicon Avalanche Photodiodes (Si APD) with dimensions of 10 mm x 10 mm are designed for extremely large areas and offered in a flat-pack package suitable for radiation detection. The Si APD C30703 is enhanced for blue-wavelength response and has a peak quantum efficiency at ~ 530 nm.
Product
The C30884EH Silicon Avalanche Photodiode (Si APD) offers very high modulation capability with high responsivity and fast rise and fall times. Because the fall time characteristic has no “tail”, the responsivity of the device is independent of modulation frequency up to about 400 MHz. This Si APD is made using a double-diffused “reach-through” structure and is optimized for high responsivity at wavelengths of below 1000 nm.
Product
The C30737PH-230-90N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 230 µm and enhanced 900 nm response in a Plastic T 1¾ package.
Product
The C30737LH-230-90N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 230 µm with enhanced 900 nm response in a leadless ceramic carrier (LCC).
Product
The C30737LH-230-92N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 230 µm with enhanced 900nm response and a 905 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-230-80N Silicon Avalanche Photodiode (Si APD) offers enhanced 800 nm response with an active diameter of 230 µm in a leadless ceramic carrier (LCC).
Product
The C30737PH-230-80N Silicon Avalanche Photodiode (Si APD) offers an active diameter of 230 µm and enhanced 800 nm response in a plastic T 1¾ through-hole package.
Product
The C30737PH-500-90N Silicon Avalanche Photodiode (APD) provides an active diameter 500 µm with enhanced 900 nm response in a plastic T 1¾ package.
Product
The C30737PH-500-80N Silicon Avalanche Photodiode (APD) provides an active diameter of 500 µm with enhanced 800 nm response in a Plastic T 1¾ housing.
Product
The C30737LH-500-90N Silicon Avalanche Photodiode (APD) offers an active diameter of 500 µm with enhanced 900 nm response in a leadless ceramic carrier (LCC).
Product
The C30737LH-500-80N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 500 µm and enhanced 800 nm response in a leadless ceramic carrier (LCC).
Product
The C30737LH-230-81N Silicon Avalanche Photodiode (SI APD) provides enhanced 800 nm response with an active diameter of 230 µm and a 635 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-230-83N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 230 µm, enhanced 800nm response and 650 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-500-83N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 500µm with enhanced 800nm response and 650 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-500-92N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 500 µm with enhanced 900nm response and a 905 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-500-81N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 500 µm with enhanced 800 nm response and a 635 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737MH-230-90N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 230µm and enhanced 900 nm response in a leadless laminated carrier (LLC).
Product
The Excelitas -150kV, 100mA E-Beam HVPS power supply with integrated AC Filament Driver of 25 Vac, 50Hz, <20 Arms and Grid Driver of -30 - +170Vdc, 200mA. Grid-driver power supplies are negative, highly regulated power supplies designed for use in E-Beam systems, capable of producing 0 to -150kVdc, 100mA of DC power. The power supplies is designed to run continuously at full output power.
Product
The C30737MH-230-80N Silicon Avalanche Photodiode (Si APD) offers enhanced 800 nm response with an active diameter of 230µm in a leadless laminated carrier (LLC).
Product
The C30737MH-500-90N Silicon Avalanche Photodiode (APD) provides an active diameter of 500 µm with enhanced 900 nm response in a leadless laminated carrier (LLC).
Product
The C30737MH-500-80N Silicon Avalanche Photodiode (APD) provides an active diameter of 500 µm with enhanced 800 nm response in a leadless laminated carrier (LLC).
Product
The integrated elliptical reflector in this 300 Watt Cermax® Xenon lamp creates a converging beam eliminating the need for secondary focusing optics. The unique oversized reflector improves light collection and maximizes the efficiency of the lamp. This lamp is well suited for use where small aperture sizes are a requirement.
Product
The C30737LH-300-70N Silicon Avalanche Photodiode (Si APD) provides an active diameter of 300 µm and enhanced 800 nm response in a leadless ceramic carrier (LCC).
Product
The C30737CH-300-70 Silicon Avalanche Photodiode (Si APD) provides a 300 µm active diameter with enhanced 800 nm response in a leadless laminated carrier (LCC).
Product
The VTP6060H is a large-area silicon photodiode in hermetic TO-8 package with a flat window. With a wide field-of-view, this photodiode produces a fast response and low dark current.
Product
The C30737LH-300-71N Silicon Avalanche Photodiode (Si APD) provides a 300 µm active diameter with an enhanced 800 nm response and 635 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-300-73N Silicon Avalanche Photodiode (APD) provides a 300 µm active diameter with enhanced 800nm response and a 650 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The C30737LH-300-72N Silicon Avalanche Photodiode (Si APD) provides a 300 µm active diameter with enhanced 800nm response and 905 nm optical bandpass in a leadless ceramic carrier (LCC).
Product
The VTD206KH is a silicon photodiode in TO-92 side-looker clear package, and an SFH206K industry equivalent. This photodiode provides a low dark current, fast response and wide field-of-view.
Product
The VTD205KH is a silicon photodiode in TO-92 side-looker clear package and a SFH205K industry equivalent. This photodiode provides a low dark current, fast response and a wide field-of-view.
Product
The Phoseon™ FireJet FJ240 UV LED Large-Area Curing System is an excellent choice for applications where maximum dosing and dwell time are crucial for effective scanning cures due to its broad exposure window. This system features advanced technologies such as WhisperCure™ and TargetCure™, which ensure reliable and consistent performance while operating quietly.
Product
The Phoseon™ FireJet FJ100 Gen2 features a compact design and offers end-to-end scalability, making it a perfect solution for a variety of printing and coating applications. This fully self-contained unit comes with five different window lengths to facilitate easy integration. The lamps can be controlled using PLC signals, allowing for instant on/off functionality, intensity control, and other primary functions, or digital control for more advanced status and control.
Product
Our High Spatial Radiance 100 is a 30-Watt Deuterium Lamp designed with our patented High Spatial Radiance (HSR) technology. This innovative deuterium lamp (D2 lamp) delivers higher output than standard D2 lamps, rivaling the best state-of-the-art, high-end lamps in the market. The HSR100 offers high stability, long lifetime, and seamless integration.
Product
The 1200 Watt Cermax® Xenon lamp expands on the capabilities of the 1000 Watt lamp, providing an even higher intensity light while still maintaining the broad spectrum, compactness and high robustness associated with Cermax products. Built with an elliptical reflector to provide a short focal distance, the lamp produces high intensity focused light with applications ranging from wafer inspection and machine vision to solar simulation and spotlights or beacons.
Product
1102502 series supply is a 125 kV/250 mA CT X-Ray PS is highly regulated Power Supply with high frequency power conversion technology used for all power supply functions. It is designed for a high-power rotating anode X-ray tube and produces -125 kV at 250 mA in a Standard Operational Mode, -130 kV at 10 mA in a Tube Conditioning Operational Mode.
Product
The VTD205H is a silicon photodiode in TO-92 side-looker package with visible blocking, and an SFH205 industry equivalent. This photodiode provides a low dark current, fast response, and wide field-of-view.
Product
The VTD206H is a silicon photodiode in TO-92 side-looker package with visible blocking, and an SFH206 industry equivalent. This photodiode provides a low dark current, fast response and wide field-of-view.
Product
The VTE1291-1H is a 880 nm Infrared Emitting Diode (IRED) in a T-1 ¾ (5mm) plastic package. It provides 20 mW of output power and a narrow beam angle of ±12°.
Product
Known for its high brightness, broad spectral range and tightly focused beam, the 300 Watt Cermax® Xenon lamp has been the industry standard since its development. This 300 Watt Xenon lamp is commonly used in diagnostic and surgical endoscopes in most major hospitals worldwide.
Product
LINOS® Rotary Support is designed for precise angular adjustment of optical components, making it ideal for applications in laser technology and photonics. Its smooth and accurate movement ensures reliable positioning of polarizers and birefringent filters, helping achieve optimal beam control and system performance. With a compact design and easy handling, this support simplifies alignment tasks while maintaining high stability. Perfect for research laboratories and advanced optical setups,…
Product
The LINOS® Rodagon 2.0/25 SWIR lens sets new standards for precise imaging in the short-wave infrared range. Engineered for 1.1-inch sensors with an image circle up to 18 mm, it offers exceptionally high transmission from the 840 to 1900 nm wavelength range, without the need to refocus. Its fast f/2.0 aperture supports bright image formation and short exposure times, making it ideal for low-light SWIR industrial and scientific applications. The integrated filter thread and robust…
Product
The VTE1291W-1H is a 880 nm Infrared Emitting Diode (IRED) in a T-1 ¾ (5 mm) plastic package. It provides 20 mW of output power and a wide beam angle of ±25°, and is UL recognized.
Product
The boost in output from this 500 Watt Cermax® Xenon lamp makes this ideal for industrial applications with higher intensity requirements. The broad spectral output of the lamp is useful where accurate color rendition is needed or when specific spectral ranges are desired. Its robust design is perfect in less-than-ideal situations where quartz lamps typically fail.
Product
The VTE1291-1H is a GaAlAs Infrared Emitting Diode in a lensed, plastic package with a narrow beam angle. This 880nm GaAlAs infrared emitting diode (IRED) is mounted in a T 1 ¾ (5mm diameter) lensed plastic package. This IRED has a narrow emission beam profile suitable for smoke detection, IR illumination and optical switching applications.
Product
The XTOF-100-A chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product
The 1000 Watt Cermax® Xenon lamp is a high intensity, high power lamp that maintains the broad spectrum, compactness and high robustness associated with Cermax products. Built with an elliptical reflector to provide a short focal distance, the lamp produces high intensity focused light with applications ranging from wafer inspection and machine vision to solar simulation and spotlights or beacons.
Product
LINOS® DLB UV 230–400 nm Dielectric-Coated Plane Mirrors are engineered for high-power and high-energy laser applications, combining durability with superior optical performance. Featuring a dielectric laser coating, these mirrors deliver high reflectivity across a broad UV range and maintain excellent performance over angles of incidence from 0° to 45°. Optimized for beam steering at a 45° angle of incidence, they provide precise 90° beam deflection while minimizing scattering…
Product
Our Noblelight UV medium-pressure lamps produce a broad and distinct line spectrum across the ultraviolet and visible ranges (200 nm to 600 nm), delivering a high power density of approximately 100 W/cm². These lamps are ideal for UVC disinfection, oxidation, curing, and various photochemical processes. Additionally, different additives can be used to customize our UV medium-pressure lamps to meet your specific needs.
Product
The FireEdge™ FE400 air-cooled UV LED curing system offers advanced features with maximum flexibility. It includes built-in intensity control options, enabling it to be used for both full-cure and pinning applications by delivering high UV power. This system provides process stability thanks to the patented TargetCure™ technology, which ensures precise and predictable UV output. Its unique scaling feature allows multiple units to be stacked end-to-end, resulting in contiguous and uniform UV…
Product
The XTOF-102-A chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product
The VTA0832H-H-NC-00-0 is a 0.8 mm pitch, 32-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high or low energy detection.
Product
The HPR-1100BGH is a large-area Silicon PIN Amplifier Module with a 2.5 mm active diameter chip in a hermetic TO package. The HPR-1100 photodiode uses an external feedback resistor for bandwidth flexibility.
Product
The VTA1216H-H-NC-00-0 is a 1.2 mm pitch 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1216H-L Series of photodiode arrays for low energy detection.
Product
The VTA2516H-L-NC-00-0 is a 2.5 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA2516H-H Series of photodiode arrays for high energy detection.
Product
The VTA2516H-H-NC-00-0 is a 2.5 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA2516H-L Series of photodiode arrays for low energy detection.
Product
The VTA1616H-L-NC-00-0 is a 1.6 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1616H-H Series of photodiode arrays for high energy detection.
Product
The VTA1616H-H-NC-00-0 is a 1.6 mm pitch, 16-element Photodiode Array meant for X-ray detection. It can be ordered with various scintillator crystals for high energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1616H-L Series of photodiode arrays for low energy detection.
Product
The VTA1216H-L-NC-00-0 is a 1.2 mm pitch, 16-element photodiode array designed for X-ray detection. It can be ordered with various scintillator crystals for low energy detection in dual-energy detection architectures. It can be paired in such systems with our VTA1216H-H Series of photodiode arrays for high energy detection.
Product
The Fusion UV F600 Series of microwave-powered UV curing systems has been a widely used product for over 20 years. Known for its reliability and solid-performance, on-going updates ensure it remains an effective solution for a wide variety of industrial curing applications.
Product
The C30916EH Large-Area Silicon Avalanche Photodiode provides a 1.5 mm active area diameter in TO-5 housing.
Product
The C30617ECERH is a high-speed InGaAs PIN Photodiode with 100 µm diameter of active area on a rectangular ceramic carrier. This photodiode provides high quantum efficiency from 800 nm to 1700 nm. It features low capacitance for extended bandwidth, as well as high resistance for high sensitivity high linearity and uniformity within two percent across the detector active area.
Product
The C30617BFCH is a high-speed InGaAs PIN Photodiode with a 100µm active diameter chip in TO-18 ball lens package and FC receptacle. This photodiode provides high quantum efficiency from 800 nm to 1700 nm. It features low capacitance for extended bandwidth, as well as high resistance for high sensitivity, high linearity and uniformity within two percent across the detector active area.
Product
The C30617BH is a high-speed InGaAs PIN Photodiode with a 100 µm active diameter chip in TO-18 ball lens package. This photodiode provides high quantum efficiency from 800 nm to 1700 nm. It features low capacitance for extended bandwidth, as well as high resistance for high sensitivity, high linearity and uniformity within two percent across the detector active area.
Product
Our Optem® FUSION infinity-corrected lower lenses are precision-engineered to optimize optical performance over extended working distances. With seamless integration and rapid swap-out capability, the lower lenses enable fine-tuning resolution, working distance, and system magnification to meet specific application needs.
Product
LINOS® LM0202 Laser Modulator Series offers electro-optical modulators designed for superior performance and efficiency. Similar to the LM13 Series, the LM0202 modulates power, phase, or polarization state outside the laser cavity but with an added feature of a four-crystal configuration that significantly reduces switching voltage while maintaining excellent birefringence compensation. This solution is ideal for demanding optical systems requiring low-voltage…
Product
The Nexus II™ air-cooled UV LED curing system is ideally suited for flexographic printing applications and provides the industry's top-performing solution. Featuring patented thermal management techniques and ValidCure™ Technology, Nexus II UV LED curing system delivers the highest total UV power output, which leads to increased print speeds, enhanced press uptime, and twice the product lifespan. ValidCure Technology validates the curing power delivered to the material surface, ensuring…
Product
The C30617L-100 is a high-speed InGaAs PIN Photodiode with a 100 µm active diameter chip in a ceramic SMD package with window. This photodiode provides high quantum efficiency from 960 nm to 1700 nm. It features low capacitance for extended bandwidth, as well as high resistance for high sensitivity, high linearity and uniformity within two percent across the detector active area.
Product
Excelitas' -150 kV, 100 mA E-Beam HVPS power supply with integrated AC Filament Driver of 25 Vac, 50 Hz, <20 Arms and Grid Driver of -30 - +170 Vdc, 200 mA. Grid Driver power supplies are negative highly regulated power supplies designed for use in E-Beam systems, capable of producing 0 to -150 kVdc, 100 mA of DC power. The power supplies is designed to run continuously at full output power.
Product
Excelitas Technologies’ YAG series of Silicon PIN detectors are high-performance N-type or P-type Si PIN photodiodes in hermetically sealed TO packages.
Product
With new universal 7-hole bases, these 300-watt Cermax® Xenon lamps are designed to fit most ceramic-body xenon lamp applications, providing a versatile solution for a wide range of lighting needs. Incorporating the same robust design that makes Cermax the industry standard, these lamps feature an extended 1000-hour warranty while maintaining the high performance and broad spectral output expected by the most demanding customers.
Product
The C30927EH-02 quadrant silicon avalanche photodiode with 1.55 mm useful diameter is designed with a double diffused "reach-through" structure. The quadrant structure has a common avalanche junction, with separation of the quadrants achieved by segmentation of the light-entry p+ surface opposite the junction. With this design, there is no dead space between the elements and therefore no loss of response at boresight.The C30927EH-02 is optimized for operating at 900 nm, providing high…
Product
The C30927EH-03 quadrant silicon avalanche photodiode with 1.55 mm useful diameter is designed with a double diffused "reach-through" structure. The quadrant structure has a common avalanche junction, with separation of the quadrants achieved by segmentation of the light-entry p+ surface opposite the junction. With this design, there is no dead space between the elements and therefore no loss of response at boresight.The C30927EH-03 is optimized for operating at 800 nm, providing high…
Product
The XTOF-RM-100 is a miniaturized 3D ToF camera. It uses a proprietary time-of-flight technology that incorporates the XTOF-100-A ToF chip and a small LED to illuminate the scene.
Product
The X-Cite® 120PC Q offers the same performance and convenience as the X-Cite 120Q fluorescence illumination system - rich spectral sample excitation with a uniformly illuminated field-of-view, the convenience of pre-aligned lamps, 2000 hour lamp lifetime, and adjustable iris - with the added option and benefits of a computer controlled microscope light source. The straightforward RS-232 communication and command set easily allows integration into automated systems, as well as…
Product
The FireEdge™ FE100 air-cooled UV LED curing system utilizes passive cooling through natural convection, enabling precise finish control for applications such as digital inkjet pinning and applications where space is limited. The extremely slim form factor features an emitting window of 8mm in diameter making it ideal for flat panel display edge curing. Ambient cooling eliminates the need for any external forced-air cooling system or chiller to remove heat from the UV source.
Product
The -25 kV, 10 mA 250 Watt power supply incorporates a high frequency quasi-resonant switch-mode design utilizing an IGBT based power inverter with a completely air insulated high voltage section. The fault tolerant design of this system offers open and short circuit protection. Low stored energy, a benefit of the high frequency switching design, provides fast response to transients and enhanced protection for the load and equipment operators.
Product
The VTB100AH is a blue-enhanced silicon photodiode in a plastic molded side-looker package. This photodiode provides an enhanced response in the blue spectral range as well as exhibits a very high shunt resistance and low dark current.
Product
The OmniCure® S1500 Pro is a revolutionary UV spot curing system designed for automated manufacturing. The S1500 Pro offers industry-leading control, reliability, and high-intensity irradiance. With a versatile array of features, this UV Curing system is tailored to meet the demands of diverse manufacturing applications, ensuring optimal performance without compromise. Explore the next level in precision curing with the S1500 Pro.
Product
The Fusion UV F300 Series offers compact microwave-powered UV curing systems with a 6-inch wide irradiator (lamp module) and power supply. It These UV curing systems are ideal for lab research, as a starter system for new processes or simpler production processes.
Product
LINOS® mounted symmetric-concave lenses are available in a comprehensive selection of focal lengths and diameters, manufactured from high-quality N-BK7 optical glass and optimized with a V-coating for 1064 nm applications. Designed to deliver reliable performance across a wide range of optical systems, these lenses are ideally suited for beam expansion, controlled divergence of collimated light, and applications requiring low spherical aberration with well-balanced imaging…
Product
The VTB6061UVJH is a silicon photodiode in a hermetic TO-8 UV enhanced flat window package where the photodiode chip is isolated from the case. This photodiode provides an enhanced response in the UV spectral range, as well as exhibits a very high shunt resistance and a low dark current.
Product
The VTB6061UVH is a silicon photodiode in a hermetic TO-8 UV enhanced flat window package. This photodiode provides an enhanced response in the UV spectral range, as well as exhibits a very high shunt resistance and a low dark current.
Product
This VTB5051UVH is a silicon photodiode in a hermetic TO-5 UV enhanced flat window package. This photodiode provides an enhanced response in the UV spectral range, as well as exhibits a very high shunt resistance and a low dark current.
Product
The VTB5051UVJH is a silicon photodiode in a hermetic TO-5 UV enhanced flat window package where the photodiode chip is isolated from the case. This photodiode provides an enhanced response in the UV spectral range, as well as exhibits a very high shunt resistance and a low dark current.
Product
Excelitas offers LINOS® unmounted symmetric-concave lenses made from high-quality N-BK7 glass with a V-coating for 1064 nm. These lenses are available in various focal lengths and diameters, providing reliable solutions for diverse optical applications. Symmetric-concave lenses are ideal for beam expansion, controlled divergence of collimated light, and system setups requiring low spherical aberration and well-balanced performance. All lenses are produced to tight tolerances for…
Product Category
The InGaAs Avalanche Photodiode product family from Excelitas features active area sizes ranging from 30 µm to 200 µm, catering to various applications requiring photonic detection between 1000 nm and 1700 nm. The C30645, C30662, and C30733 series of avalanche photodiodes (APDs) are high-speed, high-gain devices made from InGaAs/InP. They offer high quantum efficiency (QE), high responsivity, and low noise within the 1000 nm to 1700 nm spectral range, with optimization at 1300 nm and 1550 nm…
Product
The XTOF-102-B chip is a general-purpose, monolithic, fully integrated photoelectric CMOS device for optical distance measurement and object detection.
Product
The FireLine™ FL400 UV LED Area Curing System is designed for the most challenging printing, coating, and adhesive curing application environments and now features enhanced performance. This UV LED solution is scalable, allowing for custom length options, and offers exceptional optical uniformity, ensuring consistent and reliable curing for demanding industrial applications. The powerful FireLine FL400 delivers a scalable, IP66-compliant solution designed for tasks that require high UV LED…
Product
The XTOF-M-100 is a miniaturized 3D ToF camera. It uses a proprietary time-of-flight technology that incorporates the XTOF-100-A ToF chip and a small LED to illuminate the scene.
Product
Excelitas offers precision fabrication and coating techniques that enable us to create high performance cube beamsplitters that provide a unique combination of superior optical performance and high laser damage resistance. With the use of our proprietary adhesive-free Activated Covalent Bonding (ACB) technology assembly process, Excelitas cube beam splitters provide outstanding environmental stability and durability. They are available in the UV, VIS, NIR as well as narrow or broad…
Product
The Phoseon FireJet™ FJ800 UV LED Curing System is a large area curing solution for adhesive and coating curing applications requiring low irradiance and long dwell time on large scale production lines. Starting with a 100 mm x 100 mm longitudinal surface, the modular components can be scaled in all directions, providing uniform UV illumination to adjacent areas.
Product
LINOS® F-Theta-Ronar lenses are designed for aberration-free imaging of laser wavelengths between 1030 and 1080 nm. They enable exceptionally small spot diameters across the entire flat image plane. The lenses offer a wide range of focal lengths in optical glass or fused silica, suitable for high-power and ultra-short-pulse laser applications. Telecentric versions are also available to meet various laser material processing needs. With extra-low absorption coating and minimal thermal focus…
Product
Excelitas offers flashlamps that are perfectly suited for high repetition rates in stroboscopic applications. Our standard stroboscopy lamps range from linear that cover everything from low-power 2 mm arc length up to more than 600 mm and 3000 W. For high power and UV applications, we offer sizes of various quartz envelope materials. Our expert application engineers will work with you to identify the most suitable solution as well as provide ongoing support in the development of customized…
Product
The Excelitas TPG3AU1S04 905 nm pulsed laser diode delivers an optical power output of 54 W at a current of 18 A. It effectively bridges the gap between mid-range and high-power time-of-flight (ToF) systems. It features an emission area of 100 × 10 µm, allowing for efficient thermal management and consistent beam performance, even under prolonged high-load operation. With a forward voltage of 10 V, it enhances energy efficiency while ensuring strong and reliable signal return for LiDAR and…
Product Category
Acquired by Excelitas in 2023, Phoseon® was established in 2002 and earned a reputation for cutting-edge innovation in UV LED solutions for both UV curing and life science illumination. By maximizing UV energy across relevant wavelengths within a variety of sizes, Phoseon high-performance products support a wide range of applications including UV curing & drying, chromatography, fluorescence imaging, UVC decontamination, and disinfection. Our extensive portfolio of …
Product
The -25 kilovolt, 10 mA 250 watt power supply incorporates a high frequency quasi-resonant switch-mode design utilizing an IGBT based power inverter with a completely air insulated high voltage section. The fault tolerant design of this system offers open and short circuit protection. Low stored energy, a benefit of the high frequency switching design, provides fast response to transients and enhanced protection for the load and equipment operators.
Product
LINOS® F-Theta-Ronar lenses are designed to achieve aberration-free imaging for laser wavelengths between 940–980 nm, delivering exceptionally small spot diameters across the entire flat image plane. Offered in a broad range of optical glass focal lengths, they are ideal for diverse laser material processing applications. These lenses are manufactured with advanced production technologies to ensure long-term optical stability and meet the highest quality standards.
Product
The C30724EH Silicon Avalanche Photodiode (Si APD) offers 920 nm peak sensitivity and low-temperature coefficient in a metal TO-housing.
Product
The C30724PH Silicon Avalanche Photodiode (Si APD) offers 920 nm peak sensitivity and a low-temperature coefficient in a plastic TO-housing.
Product
The FFD-100H is a Large-Area Silicon PIN Photodiode with a 2.5 mm active diameter in a hermetically-sealed TO-5 package. This photodiode produces high responsivity from 400 nm to 1150 nm with a peak responsivity at 920 nm. It features an ultra-fast rise and fall time, low NEP and a low operating voltage.
Product
Excelitas offers unmounted LINOS® Plano-Convex Singlet Lenses designed for flexible integration into optical systems. Their narrow focal-length tolerances ensure consistent integration and reliable optical performance. These lenses offer precise beam focusing, while the high-power, narrowband anti-reflection coating maximizes transmission at the Nd:YAG wavelength of 1064 nm and delivers excellent laser-damage resistance for dependable performance in demanding environments.
Product
LINOS® VIS Achromats provide reliable, high-quality performance for imaging and beam-shaping applications. Offered unmounted in large diameters from 40 mm to 100 mm, these positive achromats combine two carefully selected glass elements into a single cemented doublet to correct chromatic and spherical aberrations. This design provides sharp, high-contrast imaging across the visible spectrum. With tightly controlled focal lengths and minimal wavefront distortion, these precision-…
Product
The FND-100GH is a Large-Area Silicon PIN photodiode with a 2.5 mm active diameter in a hermetically-sealed TO-5 package with a glass window. This photodiode provides high responsivity from 400 nm to 1150 nm, with a peak responsivity at 920 nm. It also features an ultra-fast rise and fall time, low NEP and low operating voltage.
Product
The C30724EH-2 Silicon Avalanche Photodiode (Si APD) provides a 905 nm filter and low-temperature coefficient in a metal TO-housing.
Product
Excelitas offers a broad selection of LINOS® fused silica lenses with coatings optimized for YAG laser applications. Available in a wide range of focal lengths and diameters, these lenses are designed to support demanding high-power optical systems and enable precise component selection. All lenses are manufactured exclusively from premium fused silica sourced from trusted suppliers and produced with the tightest tolerances to ensure outstanding optical quality and long-term…
Product
OmniCure® SC Series power supply controllers are tailored specifically for the OmniCure AC Series UV LED curing systems. Designed with application flexibility in mind, the SC Series offers a selection of system controllers to best meet the needs of a particular curing application.
Product
THIS PRODUCT IS DISCONTINUED. It has been replaced with the OmniCure V3 UV LED Heads. Technical support for this product will continue to be available.
Product
The FireLine™ FL400-i Industrial UV LED Area Curing System is specifically designed for demanding industrial coating and adhesive curing applications. It features a robust, ruggedized housing suited for challenging environments. This UV LED solution provides exceptional optical uniformity, ensuring consistent and reliable curing performance. The powerful FireLine FL400-i Industrial is also IP66-compliant, making it ideal for tasks that require high UV LED output.
Product
Excelitas offers an extensive selection of LINOS® unmounted fused silica lenses with symmetric-convex shapes, available in multiple focal lengths and diameters to address various high-power optical applications. These lenses are made from premium materials sourced only from trusted manufacturers and meet strict tolerances to ensure high quality. Each standard lens includes a double-sided narrow-band anti-reflection coating optimized for the central YAG wavelength of 1064 nm to…
Product
LINOS® Aluminum Rectangular Plano Mirrors are versatile optical components designed for high-performance reflection across a wide range of applications, enabling users to achieve precise, efficient optical results. These standard mirrors are available for the visible to infrared or the ultraviolet spectral ranges, delivering high reflection across broad spectral and angle-of-incidence ranges for reliable performance in diverse settings. VIS–IR mirrors feature a protective SiO₂ overcoating,…
Product
Excelitas offers an extensive range of LINOS® unmounted symmetric-convex lenses made from N-BK7 with a V-coating for 1064 nm. These lenses are available in a wide variety of focal lengths and diameters to support diverse optical applications. Only premium materials from trusted manufacturers are used in production, with the tightest possible tolerances to ensure exceptional quality. In addition to the unmounted versions, each lens type is offered with a high-quality, black-anodized…
Product
The Semray® 5000+ UV LED Water-Cooled System is designed to deliver exceptional printing results. It is ideal for industrial and larger print applications that require greater working distances from the substrate. This water-cooled UV LED curing light source provides up to 30% more active UV energy to the printed product, enabling faster printing speeds and the ability to print on heat-sensitive materials. In addition to reducing energy consumption, this system boasts a…
Product
LINOS® Unmounted, Fused Silica Plano-Convex Lenses are offered in multiple focal lengths and diameters, allowing you to select the best option for UV or high-power applications. Each lens includes a double-sided narrow-band anti-reflection coating optimized for the near-infrared spectrum, providing maximum transmittance at the central YAG wavelength of 1064 nm. We use only premium materials from trusted manufacturers and maintain strict tolerances to ensure exceptional quality. All…
Product
The LINOS® MeVis-C lenses are specifically developed to be used with the highest resolution sensors available on the market. Offering exceptionally high resolution across the entire sensor, the LINOS MeVis-C lenses ensure optimal performance for the most demanding applications. Furthermore, these lenses feature low distortion, minimal light falloff and excellent chromatic correction across the entire spectral range of 450 - 900 nm. Featuring premium glass and specialized…
Product
Our Smart Vacuum UV (VUV) Control System is specifically designed for effective aerosol treatment in kitchen exhaust fans and hoods. This UV control system utilizes a VUV lamp that emits light at a wavelength of 185 nm, which effectively breaks down, destroys, and neutralizes grease and odors. This process significantly reduces fire risks and maintenance costs.
Product
The OmniCure® CV300 is a versatile conveyor system designed to complement the OmniCure AC Series of high power UV LED curing systems and is suitable for production, laboratory and research and development applications. The CV300 can handle substrates up to 310 mm (12.2”) wide on its open mesh Teflon® coated fiberglass belt with an effective curing area of up to 300 mm (12”) depending on the OmniCure LED system being utilized.
Product Category
Whether observing fixed or live cells, X-Cite® offers a complete range of lamp illuminators that optimize imaging and ensure greater data reliability. These X-Cite products are known for maximum stability and superior illumination uniformity for fluorescence microscopy applications that provide the convenience of pre-aligned, long-life lamps and easy installation. When purchasing a new X-Cite illuminator, receive an additional two months product warranty upon registering your…
Product
Excelitas provides a broad selection of mounted LINOS® Plano-Convex Singlet Lenses in various focal lengths and diameters to suit your application needs. We use only premium materials from reputable manufacturers and maintain strict production tolerances to ensure high quality. Each standard lens includes a double-sided narrow-band anti-reflection coating optimized for the central YAG wavelength of 1064 nm, delivering maximum transmittance. Lenses are available mounted in a high-…
Product
Amba® UV curing mercury arc lamps are designed for reliable curing results and come in various lengths and power classes. They are ideal for use as replacement lamps in applications such as printing, wood coating, and many other UV curing processes. OEM designers turn to us for comprehensive technical consulting and in-house testing capabilities.
Product
Excelitas offers an extensive selection of LINOS® YAG-coated fused silica lenses in multiple focal lengths and diameters for high-power applications. We use only premium materials from trusted manufacturers and maintain strict tolerances to ensure exceptional quality. Each standard lens includes a double-sided narrow-band anti-reflection coating optimized for the central YAG wavelength of 1064 nm to maximize transmittance. Lenses are available mounted in a high-quality, black-…